Yanmar parts catalogue / 126650-44722 SHAFT

126650-44722 SHAFT — YANMAR

Yanmar 126650-44722 SHAFT — position on the assembly diagram
4-2
The part position is highlighted in red on the diagram
  • Part number: 126650-44722
  • Manufacturer: Yanmar
  • Name: SHAFT

The diagram shows the assembly “Tension pulley” of the Yanmar 6HALC engine.

Check sellers for 126650-44722 on pFind.pro

Where part 126650-44722 is used

Yanmar part 126650-44722 is used in 26 engine models. Assemblies: tension pulley, tension pulley(previous), tension pully and 1 more.

Engine assemblyDiagram pos.QtyEngine modelsCatalogue notes
Tension pulley 5-1 1
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 1998.08
  • Interchangeable by simultaneous replacement with No.5-1 & 8-1.
Tension pulley(previous) 5-1 1
  • Interchangeability: old and new parts are not interchangeable
Tension pulley 4-2 1
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 1998.08
  • INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH NO.4-2 & 7-2.
Tension pulley 8-2 1
  • Part superseded, not shown on the diagram
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 1998.08
  • INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH NO.8-2 & 11-2.
Tension pulley 4-2 1
  • Part superseded, not shown on the diagram
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 1998.08
  • INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH NO.4-2 & 7-2.
Tension pulley(previous) 5-1 1
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 1998.08
Tension pully 4-2 1
  • Part superseded, not shown on the diagram
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 1998.08
  • INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH NO.4-2 & 7-2.
Tension pulley(new) & belt cover 4-2 1
  • Part superseded, not shown on the diagram
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 1998.08
  • INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH NO.4-2 & 7-2.

Other parts of the “Tension pulley” assembly, Yanmar 6HALC

  Open the assembly diagram