Yanmar parts catalogue / 22287-100000 WASHER, 10

22287-100000 WASHER, 10 — YANMAR

Yanmar 22287-100000 WASHER, 10 — position on the assembly diagram
6
6
The part position is highlighted in red on the diagram
  • Part number: 22287-100000
  • Manufacturer: Yanmar
  • Name: WASHER, 10
  • Weight: 2 g
  • Length: 16 mm
  • Width: 16 mm
  • Height: 2 mm

The diagram shows the assembly “Lub.oil inlet & outlet pipe” of the Yanmar 6HALC engine.

Check sellers for 22287-100000 on pFind.pro

Where part 22287-100000 is used

Yanmar part 22287-100000 is used in 33 engine models. Assemblies: tension pulley, lub.oil pump & pipe, (24a)tension pulley(new) and 9 more.

Engine assemblyDiagram pos.QtyEngine modelsCatalogue notes
(24A)tension pulley(new) 22-1 1
  • Part superseded, not shown on the diagram
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2005.06
Lub.oil pump & pipe 41 4
Tension pulley & velt cover 22 1
Lub.oil inlet & outlet pipe 6-1 2
  • Part superseded, not shown on the diagram
  • Interchangeability: quantity in the assembly changed
Lub.oil inlet & outlet pipe 6 4
Tension pulley 25-1 1
  • Part superseded, not shown on the diagram
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2005.06
Lub.oil inlet & outlet pipe 6-2 4
  • Part superseded, not shown on the diagram
  • Interchangeability: quantity in the assembly changed
  • Applies from: date 2000.10
Lub.oil pump 68 4
Lub.oil pump 41 2
Lub.oil inlet strainer 12 4
Lub.oil pump&suc./outlot line 46 4
Tension pulley 10-1 1
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2005.06
Tension pulley 23-1 1
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2005.06
Tension pulley 12-1 1
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2005.06
Lub. oil line & in/out line 10 4
Tension pulley(new) & belt cover 30-1 1
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2005.06
Tension pully 9-1 1
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2005.06
Lub.oil pump & lub.oil inlet pipe 41 4
Lub.oil pump & pipe 47-1 4
  • Interchangeability: quantity in the assembly changed
  • Applies from: Engine No 01724
  • For deep type
Lub.oil pump & pipe 47 2
  • For deep type
Tension pulley 21-1 1
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: Engine No 03072
  • Interchangeable by simultaneous replacement with No.20-1,21-1,23.

Other parts of the “Lub.oil inlet & outlet pipe” assembly, Yanmar 6HALC

  Open the assembly diagram

Assemblies with this part