Yanmar parts catalogue / 126628-44840 SPACER

126628-44840 SPACER — YANMAR

Yanmar 126628-44840 SPACER — position on the assembly diagram
7-3
The part position is highlighted in red on the diagram
  • Part number: 126628-44840
  • Manufacturer: Yanmar
  • Name: SPACER

The diagram shows the assembly “Tension pulley” of the Yanmar 6HALC engine.

Check sellers for 126628-44840 on pFind.pro

Where part 126628-44840 is used

Yanmar part 126628-44840 is used in 22 engine models. Assemblies: tension pulley, (24a)tension pulley(new), tension pully and 1 more.

Engine assemblyDiagram pos.QtyEngine modelsCatalogue notes
Tension pulley 8-2 1
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2000.04
  • Interchangeable by simultaneous replacement with No.5-2, 8-2, 16-1.
Tension pulley 7-3 1
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2000.04
  • INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH NO.4-3,7-3 &15-1.
Tension pulley 11-3 1
  • Part superseded, not shown on the diagram
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2000.04
  • INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH NO.8-3,11-3&19-1.
Tension pulley 7-3 1
  • Part superseded, not shown on the diagram
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2000.04
  • INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH NO.4-3,7-3 &15-1.
(24A)tension pulley(new) 5 1
Tension pully 7-3 1
  • Part superseded, not shown on the diagram
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2000.04
  • INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH NO.4-3,7-3 &15-1.
Tension pulley(new) & belt cover 7-3 1
  • Part superseded, not shown on the diagram
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: date 2000.04
  • INTERCHANGEABLE BY SIMULTANEOUS REPLACEMENT WITH NO.4-3,7-3 &9-1.

Other parts of the “Tension pulley” assembly, Yanmar 6HALC

  Open the assembly diagram