Yanmar parts catalogue / 22217-120000 WASHER, SPRING 12

22217-120000 WASHER, SPRING 12 — YANMAR

Yanmar 22217-120000 WASHER, SPRING 12 — position on the assembly diagram
86
The part position is highlighted in red on the diagram
  • Part number: 22217-120000
  • Manufacturer: Yanmar
  • Name: WASHER, SPRING 12
  • Weight: 5 g
  • Length: 22 mm
  • Width: 22 mm
  • Height: 6 mm

The diagram shows the assembly “Fuel injection pump” of the Yanmar 4TN84E-GB2 engine.

Check sellers for 22217-120000 on pFind.pro

Where part 22217-120000 is used

Yanmar part 22217-120000 is used in 1049 engine models. Assemblies: camshaft & driving gear, fuel injection pump, fan and 173 more.

Engine assemblyDiagram pos.QtyEngine modelsCatalogue notes
Camshaft & driving gear 16 1
Camshaft & driving gear 18 1
Camshaft & driving gear 17 1
Fuel injection pump 92 1
Camshaft & driving gear 15 1
Fuel injection pump 73 1
Starting motor 25 3
Fan 10 1
Fan 16 1
Bonnet 4 8
Gear housing 21 6
Gear housing 20 15
Cylinder block 58 2
Fuel injection pump 82 1
Starting motor 5 6
Generator 11 4
Bonnet 6 8
Generator 14 4
Generator 13 3
Generator 10 3
Tool & label 4 3
Fuel injection pump 89C 1
  • Part superseded, not shown on the diagram
Tool, label & gasket set 6A 3
  • Interchangeability: additional part
Wooden bed 3 4
Generator 15 4
Generator 12 4
Fan 13 1
Fuel injection pump 84 1
Tools 7 3
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
Fuel injection pump 2 1
Output shaft 11 3
Radiator & support 15 8
Fuel injection pump 62 1
O.f.w.mounting 8 14
Fuel injection pump 96 1
Fuel injection pump 86 1
O.f.w. mounting 8 14
Fuel injection pump 95 1
Output shaft(optional) 4 5
Fuel injection pump 111 1
Fuel tank bracket (optional) 8 8
Fuel feed pump(optional) 12 2
Air starter 1 6
Fuel injection pump 94 1
Commonbed frame 5 6
Camshaft & driving gear 24 1
Fuel injection pump 83 1
Cylinder block 49 4
Tension pulley 8 1
Fuel injection pump 79 1
Radiator & fuel tank 57 1
Crankshaft 21 3
  • Part superseded, not shown on the diagram
Fuel feed pump gear 3 1
Tool,label & gasket set 4 3
Crankshaft & flywheel 41 3
  • Interchangeability: part is discontinued
Tool & label 7 3
Fuel inlet pipe(hfo) 10 2
C.w.collecting pipe(t/c ofw.side)(from E00137) 29 8
  • Not illustrated
C.w.collecting pipe(t/c fw.side)(from E00137) 29 8
  • Not illustrated
Frame(type p) 9 2
Fuel overflow tank(hfo)(optional) 16 2
Fuel pipe(notch wire strainer-main pipe) 29 4
Silencer (optional parts) 3 2
Tool & label 8A 3
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
Fuel tank 17 2
Air starting device 2 3
Gasket set(optional) & tools 7 3
Exh.manifold(t/c fw.side) 28 8
Bonnet 11 2
Fan 11 1
Bonnet 51 4
Cylinder head & bonnet 12 1
Common bed frame 13 8
Exh.manifold cover(t/c fw.side) 22 172
Bonnet 9 2
Crankshaft & flywheel 52 3
  • Interchangeability: part is discontinued
Crank shaft / flywheel 33 3
Frame(type p) 16 2
Fuel injection pump 110 1
Fuel pipe(metal screen strainer-main pipe) 13 2
Bonnet 3 8
Flexible joint & flywheel 3 8
Radiator support 5 8
Electric starting device 4 6
Cylinder head & bonnet 10 1
Generator 46 2
Radiator support 7 8
Exh.manifold cover(t/c ofw.side) 23 216
  • Interchangeability: part is discontinued
Exh.manifold cover(t/c fw.side) 22-1 172
  • Interchangeability: part is discontinued
Exh.manifold(t/c ofw.side) 28 8
Bonnet 7 14
Wooden bed & scraper 3 4
  • Part superseded, not shown on the diagram
Starting motor 49 3
Wooden bed & scraper 3 4
Radiator & fan 14 8
Optional part 6 4
Fan drive 15 1
Tool & label 7A 3
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
Piston & crankshaft 14 1
Fan 20 1
Cooling water system 69 8
Cylinder bloock 73 4
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
Starting motor & generator 3 3
Lub.oil system 23 4
Output shaft (optional parts) 6 3
Electric device 3 3
Starter & tension pulley 3 3
  • NON-APPLICATION FOR 6T95L-P, 6T95LT-P.
Sub-tank 3 2
  • NOT ILLUSTRATED.
Lub.oil pump driving 6 4
Output shaft(optional) 8 3
Output shaft (optional) 8 3
Cooling water system 34 4
Radiator & fan driving device 14 4
Fan driving & crank pulley 11 6
Air starter 2 3
Fan driving & crank pulley 12 8
Radiator 14 4
  • Part superseded, not shown on the diagram
  • LEVEL CHANGED:1->2
Radiator 22 4
Fuel injection pump 69 1
Bonnet 12 18
Wooden bed 4 4
Tools & gasket set 4 3
Cooling water system 32 4
Cooling water system 73 8
Output shaft 6 3
Generator 9 3
  • 6HAL-DT(A01): OPTIONAL.
Radiator & fan driving device 22 4
Bonnet 5 8
Fuel injection pump(3TN75/82E) 105 1
Fuel injection pump(from OCT.2003) 92 12
Generator & belt cover 9 2
Tension pulley 3 4
Gear housing 8 12
Cylinder block 31 8
Camshaft & drivimg gear 16 1
Generator 74 6
Camshaft & drive gear 16 1
Generator 62 6
Crankshaft & flywheel 35 3
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: FROM 1ST
Radiator & fan 33 1
Radiator & fan 36 1
Air duct b(a/c heater YPC190-H75-CYL.)(t/c fw.side) 23 5
Fan driving device 44 1
Crankshaft & flywheel 22 3
Radiator fan driving device & pully 17 6
Radiator fan driving device & pully 6 6
Lub. oil system 32 4
Fuel injection pump(up to SEP.2003) 94 12
Fan driving device 26 1
Fuel injection pump(a-bank)(mdo spec) 122 12
Starting motor 39 2
Cylinder head & bonnet 11 1
Crankshaft 18 3
Crankshaft 45 3
Starting motor & generator 3 2
Fan 15 1
Fan 14 1
Fuel injection pump(b-bank)(mdo spec) 122 12
Tool.label & gasket set(optional) 4 3
Lub. oil system 23 4
Radiator fan driving device(eng.-installed rad.spec) 10 6
Coupling,crankshaft 5 4
Fuel injection pump 100 1
Fuel injection pump 113 1
  • Part superseded, not shown on the diagram
Generator 51 2
Fuel injection pump 88 1
Exhaust manifold 32 4
Fuel injection pump 128 1
Fuel injection pump gear 2 1
Camshaft & drive gear 19 1
Idle gear 7 1
Crankshaft & flywheel 11 1
Starting motor 31 3
Fuel injection pump 81 1
Fuel injection gear 2 1
Lub.oil strainer (turbo.) 10 3
Fuel injection pump 106 1
Flexible joint & flywheel 3 12
Flexible joint & flywheel 3-1 8
  • Interchangeability: quantity in the assembly changed
  • Applies from: date 1991.02
Strating motor 6 6
Fan driving device 10 1
Fuel injection system 91 1
Label, tools & gasket set 4 3
Radiator & fan 37 1
Tool,label & gasket set 12 3
Fuel injection system 113 1
Crankshaft 22 3
Crankshaft & flywheel 28 3
Crankshaft 38 3
  • OPTIONAL PART.
Radiator & fan 35 1
Radiator & fan 42 1
Tool & label 14 3
Hopper / f.o. tank 33 1
Fuel injection pump 103 1
Bonnet 12 10
Fuel injection pump 98 1
Fuel injection pump 113 1
Generator 62 4
Fan 22 1
Crankshaft & flywheel 25 3
  • Interchangeability: additional part
Radiator & fan 44 1
Hopper & fuel tank 42 1
Crankshaft & flywheel 23 3
Fuel injection pump 115 1
Radiater & fan 35 1
Lub.oil system 32 4
Cylinder body & gear housing 76 4
Fan drive device 10 1
Fuel tank 24 1
H0PPER 13 1
Fuel injection pump 101 1
Fuel injection pump 77 1
Hopper & fuel tank 38 1
Fram & common bed 9 3
Fan case / tension pulley 16 1
  • Interchangeability: additional part
  • Applies from: 000648
Crankshaft & flywheel 18 8
  • Double bearing. Not illustrated.
Electric starting device 4-2 3
Hopper & fuel tank 5 1
Tool & gasket set(optional) 7 3
Gear housing & flywheel housing 21 6
F.o.tank & pipe(new) 19 1
Crankshaft & flywheel 35 3
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
Fuel injection pump(3TN75/82E- 94 1
Crankshaft & flywheel 35 3
F.o. tank & pipe(previous) 17 1
Gear housing & flywheel housing 20 15
Radiator 32 8
Fan driving device 11 1
Fan driving device 13 1
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: Engine No 000375
Fuel tank 32 1
Fan driving device 13 1
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: Engine No 000551
Air cleaner&silencer(YAG13,15S 39 4
Fuel injection pump 104 1
Fuel injection pump 91 1
Common bed 9 8
Tools & label 24 3
  • Optional parts.
Fuel injection pump 108 1
Bonnet (YEG12H/15H) 22 2
Bonnet (YEG20HS/24HS) 9 2
Bonnet (YEG20HS/24HS) 3 8
Generator 74 4
Fuel injection pump(4TN82E) 100 1
Fuel injection pump (4TN82(t)e 94 1
Bonnet (YEG25H/35H) 3 8
Bonnet (YEG25H/35H) 9 2
Bonnet 7 6
Bonnet (YEG8HS/10HS) 22 2
Fuel tank 17 1
  • Part superseded, not shown on the diagram
Hopper & fuel oil tank 9 1
Bed plate 22 4
Air cleaner&silencer(YAG20,25S 18 4
Lub. oil pump 28 4
Hopper & fuel oil tank 33 1
Fan case / tension pulley 16 1
  • Interchangeability: additional part
  • Applies from: 000403
Radiator & fan driving device 25 8
Fan driving 10 1
Sub-tank(radiator spec) 2 2
Radiator & fan driving device 19 8
Lub. oil system 11 4
Base 15 36
Camshaft & drive gear 15 1
Terminal 25 4
Fuel injection pump 93 1
Fuel injection pump 82A 1
H0PPER 12 1
Fan & tension pulley 10 1
Fan deriving device 11 1
Gasket set(optional) & tool 8A 3
  • Interchangeability: additional part
Mast(LB446H-1,HB-1) 17 1
Hopper & fuel tank 11 1
Mast(LB446H,hb) 18 1
Gasket set(optional) & tool 4 3
  • Interchangeability: part is discontinued
Crankshaft & main bearing 12 1
Aircleaner & silencer 13 2
Lub.oil system 43 4
Exhaust manifold & silencer 24 4
Tension pulley(previous) 18 2
Suction & exhaust manifold 52 4
Starting motor (inner parts) 25 3
Tension pully 8 1
Radiator fan driving device(eng.-installed rad.spec) 23 8
Camshaft & crankshaft 27 3
Camshaft & driving gear 18 1
  • Interchangeability: additional part
  • Applies from: FROM 1ST
Fuel oil tank 23 1
  • Part superseded, not shown on the diagram
Generator 7 5
Fuel injection pump 84 1
  • Interchangeability: part is discontinued
  • Applies from: FROM 1ST
Fuel injection pump 79A 1
Hopper & fuel tank 37 1
Crankshaft & flywheel 17 3
Camshaft & engine bed 13 4
Electric starting device 14 2
Fan drive 12 1
Label, tool & gasket set 4 3
Crankshaft 20 3
Crankshaft 45A 3
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
Fram & common bed 31B 4
Option(gene. single phase 3 11 6
Option(caster,flange) 8 4
Bonnet 44 4
Tool & label 14 3
  • Interchangeability: part is discontinued
Tool & label 16 3
  • Interchangeability: additional part
Fan 13 1
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: Engine No 00063
T00L & label 13 3
  • Interchangeability: part is discontinued
T00L & label 15 3
  • Interchangeability: additional part
Gasket set (optional) & tool 7 3
  • Interchangeability: part is discontinued
Fan 13 1
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: Engine No 00023
Fan 13 1
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: Engine No 00051
Lub.oil system 25 4
Tools, label & gasket set 7 3
Lub. oil system & start device 33 4
Gasket set (optional) & tool 8A 3
  • Interchangeability: additional part
Exh.manifold cover(t/c fw.side) 22 126
  • Interchangeability: part is discontinued
Fuel injection pump 91 1
  • Part superseded, not shown on the diagram
Radiator 24 8
  • Interchangeability: part is discontinued
  • Refer to Fig.18.
Service part 33 8
Radiator 24 8
Fuel injection pump 105 1
Fuel injection pump 65 1
Fuel injection system 88 1
Out put shaft & clutch 5 3
Fuel injection pump 61 1
Fuel injection pump 109 1
Lub. oil suction pipe 7 3
Air starter(AM500-1A) 21 2
Lub. oil pump driving 6 4
Lub. oil strainer (turbo.) 10 3
F.i.pump driving device & coupling 31 1
Flexible joint 13 1
Turbocharger 19 4
Exhaust manifold 15 4
Starter switch & battely switch 4 2
Tension pulley(6cxl-dta) 9 1
(4b)engine set parts 7 12
  • Interchangeability: additional part
  • Applies from: Engine No 02056
Bed plate 11 4
Fuel injection system 109 1
Gear housing 32 1
Camshaft & idle gear 14 1
Fuel injection pump 78 1
Fuel injection pump 66 1
Fuel injection pump 63 1
Fuel injection pump (3TN82E-RG 89 1
Camshaft & drive gear 13 1
Crankshaft & flywheel 17 8
  • DOUBLE BEARING NOT ILLUSTRATED.
Fan driving & crank pulley 11 14
Radiator 39 8
Fuel feed pump gear 2 1
Camshaft & driving gear 16-1 1
  • Interchangeability: part is discontinued
  • Applies from: Engine No 10428
(14A)fuel injection pump 93 1
Tenstion pulley 7 1
Fuel injection pump 85 1
Fuel injection pump(4TN82E-RGY 88 1
Fuel injection pump 71 1
Starting motor 2 3
Silencer 10 2
Fuel injection pump 107 1
Camshaft & driving gear 25 1
Silencer 11 4
O.f.w.mounting 8 14
  • Part superseded, not shown on the diagram
  • Interchangeability: part is discontinued
Exh.manifold & connect.pipe,cover(t.fw.side) 43 90
Crankshaft 17 1
  • Interchangeability: additional part
  • Applies from: Engine No 03352
Pump 36 4
Tool, label & gasket set 19 3
Radiater & fan 32 1
Crankshaft 14 1
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: Engine No 26780
Bonnet 72 8
Lub.oil sump 11 8
Mast(ELB114BC) 17 1
Pole mount(ELB114BS) 11 2
Mast(ELB44SC) 17 1
Tools & labels & gasket set 4 3
Rediator & fan 35 1
Fan drive 24 1
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: Engine No 004491
Fan 13 1
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: Engine No 00195
Lub.oil system 11 4
Tool & label 4 3
  • Interchangeability: part is discontinued
Fan 13 1
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: Engine No 00131
Fan 13 1
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: Engine No 00049
Tool & label 6A 3
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
Lub.oil system & breather 42 4
Fan driving device 22 1
Gear housing 5 12
Cylinder block 30 8
Exh.manifold & connect.pipe cover(t.ofw.side) 43 92
Exh.manifold & connect.pipe cover(t.ofw.side) 16 2
Exh.manifold & connect.pipe cover(t.ofw.side) 35 6
Fo.pipe(strainer-main pipe) 18 3
Exh.manifold & connect.pipe cover(t.ofw.side) 29 4
Exh.manifold & connect.pipe cover(t.ofw.side) 32 4
Exh.manifold & connect.pipe,cover(t.fw.side) 16 2
Exh.manifold & connect.pipe,cover(t.fw.side) 35 4
Exh.manifold & connect.pipe,cover(t.fw.side) 32 4
Exh.manifold & connect.pipe,cover(t.fw.side) 29 6
Fo.pipe(strainer-main pipe) 50 4
  • NOT ILLUSTRATED.
Lub.oil pump 34 4
Exh.manifold(t/c ofw.side) 26 24
Exh.manifold cover(t/c ofw.side) 22 84
  • Interchangeability: part is discontinued
Exhaust bend(RU120A-2) 10 5
Radiator fan driving device(eng.-installed rad.spec) 23 6
Clutch connector 5 6
Starting motor 5 3
Lub.oil suction pipe 16 3
Starter sw. & battely sw. 4 2
Fuel injection pump 86 12
Tool & label 8A 3
  • Interchangeability: additional part

Other parts of the “Fuel injection pump” assembly, Yanmar 4TN84E-GB2

  Open the assembly diagram