XNN38N10N51 COLLAR, THRUST — YANMAR
3
The part position is highlighted in red on the diagram
- Part number: XNN38N10N51
- Manufacturer: Yanmar
- Name: COLLAR, THRUST
- Weight: 15 g
- Length: 30 mm
- Width: 30 mm
- Height: 5 mm
The diagram shows the assembly “Turbocharger(ru110)” of the Yanmar 6NHLG-ST engine.
Where part XNN38N10N51 is used
Yanmar part XNN38N10N51 is used in 2 engine models. Assemblies: turbocharger component part(ru110-1a), turbocharger(ru110).
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Turbocharger component part(RU110-1A) | 3 | 1 | ||
| Turbocharger(RU110) | 3 | 1 |
Other parts of the “Turbocharger(RU110)” assembly, Yanmar 6NHLG-ST
- 1133654-18022Turbocharger1 pcs
- 2XNN38N10E15Shaft,turbin1 pcs
- 4XNN381012Bush1 pcs
- 5XNN381008Nut M101 pcs
- 6XNN381014Seal ring1 pcs
- 7XNN382205Turbine nozzle1 pcs
- 8XNN38N30D35Casing,blower1 pcs
- 9XNN373005Keep plate4 pcs
- 10XJB113063Hexagon bolt M88 pcs
- 11XJA121073Screw1 pcs
- 12XNU21N30N51Label1 pcs
- 13XNU21N30A52Rivet2 pcs
- 14XNN384843Diffuser1 pcs
- 15XNN385374Blower impeller1 pcs
- 16XNN38N55B00Seal plate1 pcs
- 17XNN385484Ring1 pcs
- 18XNN385485O ring1 pcs
- 19XNN38N60D00Housing, bearing1 pcs
- 20XNN957104Snap ring4 pcs
- 21XNN38N61N07Washer4 pcs
- 22XNN38N61A06Screw M144 pcs
- 23XNN386006Plate1 pcs
- 24XNN38N60N11Bolt m 64 pcs
- 25XJB652016Washer4 pcs
- 26XNN386652Metal2 pcs
- 27XNN386602Metal,thrust1 pcs
- 28XNN38N67E02Housing, turbine1 pcs
- 29XNN386706Retainer4 pcs
- 30XNN386705Bend washer4 pcs
- 31XNN386708Bolt M88 pcs
- 32XNN968004Stud M124 pcs
- 33XJB227003Nut M128 pcs
- 34XNN386707Nut,type 3,M124 pcs
- 35133654-18790Mechanical seal1 pcs
- 36152633-18190Gasket,t/c inlet1 pcs
