X414123300 PACKING — YANMAR
25
The part position is highlighted in red on the diagram
- Part number: X414123300
- Manufacturer: Yanmar
- Name: PACKING
- Weight: 15 g
- Length: 160 mm
- Width: 36 mm
- Height: 7 mm
The diagram shows the assembly “Starting motor” of the Yanmar 6/8NHL engine.
Where part X414123300 is used
Yanmar part X414123300 is used in 2 engine models. Assembly: starting motor.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Starting motor | 25 | 1 |
Other parts of the “Starting motor” assembly, Yanmar 6/8NHL
- 1152979-77011Motor r,starting1 pcs
- 2X131007200Yoke assy.1 pcs
- 3X224025650Bracket, rear1 pcs
- 4X133104300Holder assy, brush1 pcs
- 5X525002800Spring,brush4 pcs
- 6X1331043009Holder assy, brush1 pcs
- 7X2660074006Brush1 pcs
- 8X2660074007Brush4 pcs
- 10X500010500Screw2 pcs
- 11X132007800Armature assy1 pcs
- 12X620601110Ball bearing1 pcs
- 13X620601120Ball bearing1 pcs
- 14X8167071906Bolt(starter2 pcs
- 15X224500800Gear case1 pcs
- 16X503105700Shim1 pcs
- 17X244102800Shaft1 pcs
- 18X503101100Washer, shim1 pcs
- 19X224406200Holder1 pcs
- 20X136105310Clutch assy, pinion1 pcs
- 21X366102000Stopper, pinion1 pcs
- 22X522101200Retainer2 pcs
- 23X505804200Retaining ring1 pcs
- 24X501027430Bolt1 pcs
- 26X137204100Lever assy1 pcs
- 27X360017800Rod1 pcs
- 28X422305610Holder1 pcs
- 29X520109300Coil, spring1 pcs
- 30X2246025009Pinion case assy1 pcs
- 31X2620105009Metal1 pcs
- 32X1350118019Switch, engage1 pcs
- 33X501027300Bolt2 pcs
- 34X410100600Cap1 pcs
- 35X410100700Cap1 pcs
- 3626292-140352Bolt, M14X 353 pcs
- 3722212-140000Spring washer 143 pcs
- 3841903-650040Cap,terminal rubber1 pcs
- 3929110-150012Terminal, 150.0-122 pcs
