X266000600 BRUSH — YANMAR
11
The part position is highlighted in red on the diagram
- Part number: X266000600
- Manufacturer: Yanmar
- Name: BRUSH
- Weight: 22 g
- Length: 75 mm
- Width: 24 mm
- Height: 7 mm
The diagram shows the assembly “Starting motor” of the Yanmar 4HAL(A01) engine.
Where part X266000600 is used
Yanmar part X266000600 is used in 6 engine models. Assembly: starting motor.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Starting motor | 11 | 4 |
Other parts of the “Starting motor” assembly, Yanmar 4HAL(A01)
- 1126450-77010Starter1 pcs
- 3X950000000Screw8 pcs
- 4X131600100Coil2 pcs
- 6X224000440Bracket1 pcs
- 7X262007700Metal1 pcs
- 8X1331000009Holder, brush1 pcs
- 9X525000000Spring4 pcs
- 10X403000400I-washer1 pcs
- 12X840010080I-bushing1 pcs
- 13X843010020I-washer1 pcs
- 14X340900600Cover1 pcs
- 15X132004700Armature1 pcs
- 16X503000000Washer1 pcs
- 17X503100400Washer, shim1 pcs
- 18X503100410Washer, shim5 pcs
- 19X224404200Bracket1 pcs
- 20X262002820Metal1 pcs
- 21X137200000Lever1 pcs
- 22X360000200Rod1 pcs
- 23X505800000Retaining ring2 pcs
- 24X136004700Clutch assy, pinion1 pcs
- 25X136200500Pinion1 pcs
- 26X262001000Metal1 pcs
- 27X520000000Coil, spring4 pcs
- 28X3011001009Plate assy, clutch14 pcs
- 29X505800200Ring, retaining1 pcs
- 30X525200000Spring2 pcs
- 31X503100110Shim, washer1 pcs
- 32X300100200D-plate4 pcs
- 33X505800300Ring, retaining1 pcs
- 34X505800400Ring, retaining1 pcs
- 35X3661001019Stopper assy1 pcs
- 36X204609100Pinion case1 pcs
- 37X262003210Metal1 pcs
- 38X501002400Bolt4 pcs
- 39X135000110Switch assy, engage1 pcs
- 40X501000400Bolt4 pcs
- 41X305100000Lock plate2 pcs
- 42X133800100Band assy1 pcs
- 43X242510000Bar assy1 pcs
- 4422217-140000Washer, spring 143 pcs
- 4526156-140352Bolt, M14X 35 plated3 pcs
