X262009300 METAL — YANMAR
30
The part position is highlighted in red on the diagram
- Part number: X262009300
- Manufacturer: Yanmar
- Name: METAL
- Weight: 33 g
- Length: 65 mm
- Width: 50 mm
- Height: 35 mm
The diagram shows the assembly “Starting motor” of the Yanmar 6HAL engine.
Where part X262009300 is used
Yanmar part X262009300 is used in 6 engine models. Assemblies: starting motor, starting motor(earth float type).
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Starting motor | 30 | 1 | ||
| Starting motor(earth float type) | 27 | 1 |
Other parts of the “Starting motor” assembly, Yanmar 6HAL
- 146120-000490Relay, safety1 pcs
- 222217-140000Washer, spring 143 pcs
- 326156-140352Bolt, M14X 35 plated3 pcs
- 422217-060000Washer, spring 64 pcs
- 522217-080000Washer, spring 82 pcs
- 626106-060102Bolt, M6X 10 plated4 pcs
- 726106-080162Bolt, M8X 16 plated2 pcs
- 842150-552390Plate1 pcs
- 9126650-77011Starter1 pcs
- 11X500008300Screw4 pcs
- 12X131606800Field coil2 pcs
- 14X224013900Bracket, rear1 pcs
- 15X133103200Holder w/brush1 pcs
- 16X525002200Spring, brush4 pcs
- 17X266205700Brush1 pcs
- 18X403005700Washer1 pcs
- 19X404106000If busing4 pcs
- 20X132005901Armature assy1 pcs
- 21X620600500Ball bearing1 pcs
- 22X620600540Ball bearing1 pcs
- 23X501021330Bolt1 pcs
- 24X501021320Bolt1 pcs
- 25X224500201Housing, gears1 pcs
- 26X244100100Shaft1 pcs
- 27X503105200Shim1 pcs
- 28X503105100Shim1 pcs
- 29X224405000Bracket1 pcs
- 31X641402800O-ring1 pcs
- 32X137203500Lever assy1 pcs
- 33X501021400Bolt1 pcs
- 34X305102300Lock plate1 pcs
- 35X136102700Pinion assy1 pcs
- 36X366101900Stopper1 pcs
- 37X522101000Riteaner2 pcs
- 38X505804100Ring1 pcs
- 39X224601601Case1 pcs
- 40X262009600Bearing1 pcs
- 41X340905600Cover1 pcs
- 42X501021310Bolt2 pcs
- 43X135008500Switch assy1 pcs
- 44X501019020Bolt2 pcs
- 45X300111600D-plate1 pcs
- 46X133801900Clamp1 pcs
- 47X242501400Bar assy1 pcs
- 48X410105900Cap1 pcs
- 49X410103000Cap1 pcs
- 50X059001108Relay, starting1 pcs
