X211449007 HOLDER ASSY, BRUSH — YANMAR
8
The part position is highlighted in red on the diagram
- Part number: X211449007
- Manufacturer: Yanmar
- Name: HOLDER ASSY, BRUSH
- Weight: 40 g
- Length: 75 mm
- Width: 65 mm
- Height: 17 mm
The diagram shows the assembly “Starter motor” of the Yanmar TF150DI-LEYB engine.
Where part X211449007 is used
Yanmar part X211449007 is used in 12 engine models. Assemblies: starting motor, starter motor, starting moter.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Starting motor | 8 | 1 | ||
| Starting motor | 14 | 1 | ||
| Starting motor | 15 | 1 | ||
| Starter motor | 8 | 1 | ||
| Starting moter | 15 | 1 |
Other parts of the “Starter motor” assembly, Yanmar TF150DI-LEYB
- 1105300-77011Motor, starting1 pcs
- 2X211461005Armature1 pcs
- 3X2130350900Bearing, ball1 pcs
- 4X211425511Ball bearing1 pcs
- 5X211442003Coil assy, field1 pcs
- 6X21143215Screw, core4 pcs
- 7X211469002Brush (+)2 pcs
- 9X211459002Brush (-)2 pcs
- 10X21148314Spring, brush4 pcs
- 11X211483003Cover1 pcs
- 12X2114T71110Switch, magnetic1 pcs
- 13X211446012Lever, shift1 pcs
- 14X211468005Bolt, through2 pcs
- 15X21145866Bolt2 pcs
- 16X211455011Pinion assy1 pcs
- 17X211465011Shaft, pinion1 pcs
- 18X211429006Stopper set1 pcs
- 19X211425506Clutch assy1 pcs
- 20X211495502Bearing, ball1 pcs
- 21X211455502Ball bearing1 pcs
- 22X211456605Case assy, gear1 pcs
- 23X21142742Cover (a), rubber1 pcs
- 24X211458012Cover kit1 pcs
- 25X211428008Retainer, bearing1 pcs
- 2610571H-77470Bracket, starter1 pcs
- 2710571H-77480Cover, pinion gear1 pcs
- 2822217-060000Washer, spring 64 pcs
- 2922351-060012Pin, spring 6.0X121 pcs
- 3026013-120302Bolt, M12X 302 pcs
- 3126014-060122Bolt, M6X 122 pcs
- 3226216-060202Stud, M6X 204 pcs
- 3326366-080002Nut, M81 pcs
- 3426716-060002Nut, M64 pcs
- 3510540H-77500Bolt, spacer2 pcs
- 3610567H-77600Collar2 pcs
- 3710567H-77780Cover, starter motor1 pcs
