X21141360 HOLDER ASSY, BRUSH — YANMAR
33
The part position is highlighted in red on the diagram
- Part number: X21141360
- Manufacturer: Yanmar
- Name: HOLDER ASSY, BRUSH
- Weight: 62 g
- Length: 80 mm
- Width: 76 mm
- Height: 15 mm
The diagram shows the assembly “Starting motor(3/4tn75/82e-g1)” of the Yanmar 3TN75E-G1 engine.
Where part X21141360 is used
Yanmar part X21141360 is used in 14 engine models. Assemblies: starting motor, starting motor(standard), starting motor(3/4tn75/82e-g1).
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Starting motor | 10 | 1 | ||
| Starting motor(standard) | 10 | 1 | ||
| Starting motor(3/4TN75/82E-G1) | 33 | 1 |
Other parts of the “Starting motor(3/4TN75/82E-G1)” assembly, Yanmar 3TN75E-G1
- 24124450-77010Starter, S114-1461 pcs
- 25X211491001Armature assy1 pcs
- 26X21148110Washer set, thrust1 pcs
- 27X21147155Stopper set, pinion1 pcs
- 28X211482001Coil assy, field1 pcs
- 29X21145312Brush, +2 pcs
- 30X21147215Screw, pole core4 pcs
- 31X211423001Cover assy, rear1 pcs
- 32X21145352Metal1 pcs
- 34X21145313Brush (-)2 pcs
- 35X21145314Spring4 pcs
- 36X21143454Plate, center1 pcs
- 37X211445002Pinion assy1 pcs
- 38X211486003Housing assy, gears1 pcs
- 39X21145661Metal, gear case1 pcs
- 40X21148652Lever set, shift1 pcs
- 41X211457001Switch, magnetic1 pcs
- 42X21146815Bolt, through2 pcs
- 4326557-040122Screw, M4X122 pcs
- 44X21143963Cover kit, duct1 pcs
- 4526116-060322Bolt, M6X 32 plated2 pcs
- 4626116-120252Bolt, M12X 25 plated2 pcs
