X135913300X0 TERMINAL ASSY — YANMAR
29
The part position is highlighted in red on the diagram
- Part number: X135913300X0
- Manufacturer: Yanmar
- Name: TERMINAL ASSY
- Weight: 65 g
- Length: 100 mm
- Width: 70 mm
- Height: 30 mm
The diagram shows the assembly “Starting motor” of the Yanmar AY40L-ET engine.
Where part X135913300X0 is used
Yanmar part X135913300X0 is used in 3 engine models. Assembly: starting motor.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Starting motor | 29 | 1 |
Other parts of the “Starting motor” assembly, Yanmar AY40L-ET
- 1148620-77080Motor, starting1 pcs
- 2X131015520X0Yoke assy1 pcs
- 3X133107510X0Holder assy, brush1 pcs
- 4X224033900X0Bracket, rear1 pcs
- 5X525003200X0Spring, brush4 pcs
- 6X266010620X0Brush4 pcs
- 7X404006510X0Eye bushing1 pcs
- 8X404006410X0Eye bushing1 pcs
- 9X132014210X0Armature1 pcs
- 10X620605500X0Ball bearing1 pcs
- 11X342904500X0Cover1 pcs
- 12X414133200X0Packing1 pcs
- 13X365003300X0Gear, internal1 pcs
- 14X137100020X0Gear assy, planetary1 pcs
- 15X503107600X0Shim washer1 pcs
- 16X137300010X0Shaft assy1 pcs
- 17X625600100X0Steel ball1 pcs
- 18X134200420X0Bracket assy, center1 pcs
- 19X360027810X0Rod1 pcs
- 20X323205410X0Lever1 pcs
- 21X136107400X0Clutch assy, pinion1 pcs
- 22X641407200X0Dust seal1 pcs
- 23X366102710X0Stopper, pinion1 pcs
- 24X522102910X0Hook1 pcs
- 25X134100200X0Case assy, pinion1 pcs
- 26X620605400X0Needle bearing1 pcs
- 27X641407410X0O-ring2 pcs
- 28X135017810X9Switch assy, engage1 pcs
- 30148620-7710010-32UNF-2A1 pcs
- 31148620-771101/2-13UNC1 pcs
- 32148620-77500Cap1 pcs
- 33152633-78280Cap,terminal2 pcs
- 3422217-140000Washer, spring 143 pcs
- 3526292-140352Bolt, M14X 353 pcs
- 3641903-650040Cap,terminal rubber1 pcs