X0285100640 HOLDER ASSY, BRUSH — YANMAR
17
The part position is highlighted in red on the diagram
- Part number: X0285100640
- Manufacturer: Yanmar
- Name: HOLDER ASSY, BRUSH
- Weight: 205 g
- Length: 50 mm
- Width: 50 mm
- Height: 40 mm
The diagram shows the assembly “Starting motor(standard)” of the Yanmar 4TNE84-G1A engine.
Where part X0285100640 is used
Yanmar part X0285100640 is used in 10 engine models. Assemblies: starting motor(standard), starting motor, starting motor(cold district).
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Starting motor(standard) | 17 | 1 | ||
| Starting motor | 17 | 1 | ||
| Starting motor(cold district) | 17 | 1 |
|
|
| Starting motor(cold district) | 17 | 1 |
|
Other parts of the “Starting motor(standard)” assembly, Yanmar 4TNE84-G1A
- 1129429-77010Starter assy1 pcs
- 2X0280630011Retainer1 pcs
- 3X0281003760York1 pcs
- 4X0282002140Armature1 pcs
- 5X9491002160Bearing1 pcs
- 6X0283002081Clutch assy1 pcs
- 7X0280210230Nut1 pcs
- 8X0283270140Retainer1 pcs
- 9X0283711770Pinion1 pcs
- 10X0283810040Shaft1 pcs
- 11X9490721080Ring1 pcs
- 12X9491703371Spring, coil1 pcs
- 13X9491704260Spring1 pcs
- 14X0283060061Roller5 pcs
- 15X0283711410Pinion1 pcs
- 16X0283711420Pinion1 pcs
- 18X0534009490Switch assy,magnet1 pcs
- 19X1284017300Housing1 pcs
- 20X9019008651Nut1 pcs
- 21X9025808001Washer1 pcs
- 22X9080110060O-ring2 pcs
- 23X9490064720Screw2 pcs
- 24X9490422860Through bolt2 pcs
- 25X9490561370Nut1 pcs
- 26X9491200240Ball1 pcs
- 27X9491403680O-ring1 pcs
- 28X9491703380Spring1 pcs
- 2926116-120252Bolt, M12X 25 plated2 pcs
