Yanmar parts catalogue / 26116-120452 BOLT, M12X 45 PLATED

26116-120452 BOLT, M12X 45 PLATED — YANMAR

Yanmar 26116-120452 BOLT, M12X 45 PLATED — position on the assembly diagram
14
14
The part position is highlighted in red on the diagram
  • Part number: 26116-120452
  • Manufacturer: Yanmar
  • Name: BOLT, M12X 45 PLATED
  • Weight: 52 g
  • Length: 53 mm
  • Width: 22 mm
  • Height: 12 mm

The diagram shows the assembly “Cooling water line(in/out)” of the Yanmar 6KHL-ST engine.

Check sellers for 26116-120452 on pFind.pro

Where part 26116-120452 is used

Yanmar part 26116-120452 is used in 58 engine models. Assemblies: radiator & support, gear housing, mist separator and 36 more.

Engine assemblyDiagram pos.QtyEngine modelsCatalogue notes
Radiator & support 16 8
Gear housing 22 4
Mist flexible pipe 3 8
Mist separator 7 8
Cooling water flexible pipe 4 8
Cooling water flexible pipe 18 4
Radiator fan driving device & pully 22 2
Cooling water pump 22 6
Lub.oil pipe(cooler-cly.bed) 29 2
  • Part superseded, not shown on the diagram
Lub.oil lines(cooler-cyl. bed) 24 2
Cooling water flexible pipe 11 4
Radiator & fan driving device 20 8
Cooling  water pipe 40 2
Base 16 36
Cooling water pipe 77 4
Cooling fresh water thermostat 7 4
Radiator & fan driving device 26 8
Cooling water pipe 34 2
Cooling water flexible pipe 11 8
Cooling water pipe &thermostat 85 4
Exhaust manifold & silencer 31 4
Gear housing 23 4
Suction & exhaust manifold 50 4
C.w.pipe & thermostat 92 4
C.w.pipe(discharge cooling:separately attached c.w.pump) 34 2
C.w.pipe(discharge cooling) 82 4
C.w.thermostat(discharge cooling) 8 4
Cooling water pipe & thermostat(2-line discharge cooling spec) 91 4
Cooling water pipe & thermostat(radiator cooling spec.) 77 4
Radiator & cooling water pipe 47 4
Starting motor & generator 5B 3
  • Part superseded, not shown on the diagram
Breather 61 4
  • NOT ILLUSTRATED
Fuel tank 31 8
Fuel tank 32 4
Cooling water pipe &thermostat 93 4
Cooling water pipe & thermostat(1-line discharge cooling spec) 79 4
C.s.w.pipe(s.w.pump/jabsco) 7 4
  • W/O COMPRESSER.
C.w.pipe(cooler-distrib.pipe) 17 2
C.w.lines(land-use) 7 8
Kingston valve & flow gauge 12 4
  • Part superseded, not shown on the diagram
  • STEEL VESSEL : NK INTERNAL (PARTS SHOW IN REMARK (3) ARE NOT ILLUS- TRATED.
Silencer 18 4
Fuel feed pump 2 4
Cooling water pipe &thermostat 99 4
Cooling water pipe(pump -cylinder) 14 8
Cooling sea water pipe(wesco) 26 4
  • W/O COMPRESSER.
(28A)c.w.pipe(6HAL2 discharge spec)(engine in/out) 16 4
Cooling sea water pipe(wesco) 6 4
Cooling sea water pipe(wesco) 15 4
Cooling water line(in/out) 14 8
C.s.w.pipe(s.w.pump non-equipment) 4 4

Other parts of the “Cooling water line(in/out)” assembly, Yanmar 6KHL-ST

Open the assembly diagram

Assemblies with this part