26106-100702 BOLT, M10X 70 PLATED — YANMAR
16
The part position is highlighted in red on the diagram
- Part number: 26106-100702
- Manufacturer: Yanmar
- Name: BOLT, M10X 70 PLATED
- Weight: 460 g
- Length: 100 mm
- Width: 80 mm
- Height: 20 mm
The diagram shows the assembly “Suction manifold” of the Yanmar 6T95L-GB engine.
Where part 26106-100702 is used
Yanmar part 26106-100702 is used in 59 engine models. Assemblies: lub.oil pump, cooling water system, lub.oil pipe(out side) and 23 more.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Lub.oil pump | 24 | 1 | ||
| Cooling water pipe | 83 | 8 | ||
| Cooling water thermostat | 3 | 8 | ||
| Lub.oil pipe(out side) | 22 | 4 | ||
| Lub.oil cooler | 17 | 2 |
|
|
| Suction manifold | 16 | 4 | ||
| Lub.oil pipe(out side) | 23 | 4 | ||
| Cooling water system | 18 | 4 | ||
| Cooling water system | 22 | 4 | ||
| Lub.oil cooler | 20 | 2 |
|
|
| Lub.oil cooler | 19 | 2 |
|
|
| C.w.pipe(radiator cooling) | 86 | 8 | ||
| Hand starting device | 19-1 | 1 |
|
|
| Balancer | 17-1 | 1 |
|
|
| L.o.strainer & by-pass straine | 22 | 2 |
|
|
| L.o.strainer & by-pass straine | 22-1 | 2 |
|
|
| Cooling fresh water thermostat | 6 | 8 | ||
| Cooling water pipe(new) | 110 | 8 | ||
| Lub.oil cooler | 25 | 2 |
|
|
| Lub.oil sump | 39 | 22 |
|
|
| Exhaust manifold & silencer | 18 | 1 | ||
| Fan driving & crank pulley | 51 | 2 | ||
| Radiator & support | 10 | 4 | ||
| Balancer | 19 | 8 | ||
| Fan driving & crank pulley | 50 | 2 | ||
| Fan driving & crank pulley | 26 | 2 | ||
| Balancer | 18 | 1 | ||
| Breather | 43 | 2 |
|
|
| Balancer | 19 | 1 | ||
| Lub.oil pipe(out side/radiator cooling spec.) | 8 | 4 | ||
| Engine bracket | 10 | 4 | ||
| Hand starting device | 19-1 | 1 |
|
|
| C.w.thermostat(discharge cooling) | 7 | 8 | ||
| Exhaust manifold & silencer | 10 | 1 | ||
| Lub.oil sump & dipstick | 19 | 2 | ||
| Lub.oil sump | 12-1 | 4 |
|
|
| Lub.oil cooler | 13 | 2 | ||
| Cooling water pipe(6laalg) | 82 | 8 | ||
| Cooling water pipe(6LAALG-1) | 110 | 8 | ||
| C.w.thermostat(discharge cooling:separately attached c.w.pump) | 5 | 8 | ||
| Lub.oil cooler | 11 | 2 |
|
|
| Cooling water syste | 22 | 4 | ||
| Cooling water system | 17 | 4 |
Other parts of the “Suction manifold” assembly, Yanmar 6T95L-GB
- 1724610-12700Manifold assy,intake1 pcs
- 323414-120000Gasket, 12X1.01 pcs
- 423881-120002Plug 121 pcs
- 5124610-12110Gasket, manifold2 pcs
- 626106-080202Bolt, M8X 20 plated12 pcs
- 7124610-12470Hose, rubber1 pcs
- 9124411-77900Heater1 pcs
- 10124411-12560Gasket, silencer3 pcs
- 11124610-12570Bend, air heater1 pcs
- 12124610-12580Joint, air heater1 pcs
- 1323000-090000Clamp, 902 pcs
- 1526106-100222Bolt, M10X 22 plated4 pcs
- 17124612-77940Wire assy1 pcs
- 18120130-77840Cap, rubber1 pcs
- 20A124612-77910Switch1 pcs
- 20B124612-77920Switch1 pcs
- 2126106-060142Bolt, M6X 14 plated2 pcs
