Yanmar parts catalogue / 23894-030002 PLUG, G3/8

23894-030002 PLUG, G3/8 — YANMAR

Yanmar 23894-030002 PLUG, G3/8 — position on the assembly diagram
6
6
The part position is highlighted in red on the diagram
  • Part number: 23894-030002
  • Manufacturer: Yanmar
  • Name: PLUG, G3/8
  • Weight: 41 g
  • Length: 23 mm
  • Width: 20 mm
  • Height: 19 mm

The diagram shows the assembly “Exhaust bend” of the Yanmar 6HAL2-T engine.

Check sellers for 23894-030002 on pFind.pro

Where part 23894-030002 is used

Yanmar part 23894-030002 is used in 173 engine models. Assemblies: exhaust manifold, exhaust bend, lub.oil cooler and 59 more.

Engine assemblyDiagram pos.QtyEngine modelsCatalogue notes
Exhaust bend 6 2
Cooling fresh water cooler 13 1
Exhaust manifold 9 6
Exhaust manifold & silencer 11 1
Lub.oil cooler 21 1
Exhaust manifold 7 1
Air cooler(YPC190) 30 2
Exhaust manifold 11 1
Exhaust manifold 10 1
  • Interchangeability: part is discontinued
  • Applies from: date 1983.09
Exhaust bend 6 1
Exhaust manifold 7 8
Exhaust bend 5 2
Lub. oil C00LER 22 2
Exhaust manifold 9 1
Exhaust manifold 6-1 6
  • Interchangeability: old and new parts are interchangeable
  • Applies from: date 1992.07
Thermo heater 14 1
Exhaust manifold 15 1
A/c by-pass pipe(t/c fw.side) 27 2
  • Zinc coating or Poly-lining
A/c heater by-pass pipe(t/c fw.side) 33 2
A/c heater by-pass pipe(t/c ofw.side) 42 2
  • Zinc coating or Poly-lining
Exhaust manifold 14 6
C.w.pipe(lo/c-a/c heater)(t/c fw.side)(for notch st.) 18 1
  • Zinc coating or Poly-lining
C.w.pipe(lo/c-a/c)(t/c fw.side)(for notch strainer) 32 1
  • Zinc coating or Poly-lining
Exhaust manifold 8 1
Exhaust manifold(water tank spec) 7 2
Exhaust bend 51 1
  • 1-LINE COOLING SYSTEM SPEC.
Breather 5 1
Exhaust bend(water tank spec) 6 1
C.W.2-PIPE system,fresh water 22 1
Exh.manifold 11-1 7
  • Part superseded, not shown on the diagram
  • Interchangeability: new part number replaces the old one, not vice versa
C.w.pipe(lo/c-a/c heater)(t/c fw.side)(for b&k st.) 18 3
Air cooler 19 2
Air cooler heater(YPC190-H75) 47 1
Exhaust manifold 14 1
Breather 12 1
C.w.lines(air compressor) 6 1
C.w.collecting pipe 14 1
C.w.pipe(air compressor) 6 1
Cooling fresh water cooler 14 1
C.w.lines(cooler-distrib.pipe) 9 2
C.w.collecting pipe 26 1
Thermo heater (non-l.o.priming) 15 1
Thermo heater (lub.oil priming) 15 1
Lub. oil cooler 17 1
Exhaust manifold 5 3
Exhaust manifold 39 3
C.W.2-PIPE system,sea water 12 2
Lub.oil cooler 15 1
Exhaust bend 10 2
Exhaust manifold 11 2
Lub.oil strainer 27 1
Lub.oil strainer 19 2
Exh.bend(6b) 13 2
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
Lub.oil cooler 18 2
Exhaust manifold 17 1
Lub. oil C00LER 22 1
Air cooler 20 1
Lub.oil cooler 18 2
  • RADIATOR COOLING SPEC.
Exhaust manifold 6 1
Exhaust manifold & silencer 8 1
Suc.,exh. manifold & cleaner 36 1
Air cooler 26 1
Turbocharger 14 1
Exhaust manifold 31 3
Turbocharger 16 1
Exhaust pipe 10 1
Suction & exhaust manifold 28 1
  • Interchangeability: additional part
Lub.oil thermostat 9 1
Exhaust manifold & silencer 24 1
Exhaust manifold(optional) 14 8
Exhaust bend(radiator spec) 6 1
Suc.exh.manifold & air cleaner 37 1
Exhaust manifold 13 3
Exhaust manifold 25 1
C.w.pipe(lo/c-a/c)(t/c fw.side)(for ihi strainer) 18 1
Exhaust bend(6b) 4 2
  • Part superseded, not shown on the diagram
  • Interchangeability: part is discontinued
  • Applies from: date 1996.08
  • LEVEL CHANGED:2->1
Exhaust bend(6b) 4 2
  • Part superseded, not shown on the diagram
  • Interchangeability: part is discontinued
  • LEVEL CHANGED:2->1
Air cooler 17 1
C.w.pipe(lo/c-a/c)(t/c ofw.side)(for b&k strainer) 39 2
  • Not illustrated
Exhaust manifold(radiator cooling spec.) 5 3
Exhaust manifold(radiator cooling spec.) 13 3
Exhaust manifold(water cooring) 9 6
Exhaust manifold(water cooring) 9-1 7
  • Part superseded, not shown on the diagram
  • Interchangeability: quantity in the assembly changed
  • Applies from: date 2000.03
Lub.oil cooler 21 2
C.w.pipe(spacer) 13 1
C.w.pipe(cyl.head-exh.manifold 7 6
Suction/exhaust manifold 15 1
Turbocharger 7 2
Exhaust manifold 6 1
  • Interchangeability: part is discontinued
Air cooler,blank.flange(square) & air cooler mtg.bracket 17 1
Lub.oil cooler 11 3
Turbocharger 11 1
Cylinder block 59 1
Lub.oil cooler 8 3
Exhaust manifold(radiator cooling spec.) 39 3
C.w.pipe(lo/c-a/c)(t/c fw.side)(for b&k strainer) 30 2
C.s.w.pipe(s.w.pump/jabsco) 15 1
  • NOT ILLUSTRATED:WATER SUCTION 18
Suction & exhaust manifold 22 1
Exhaust manifold 12 1
Turbocharger 47 1
Suction/exhaust manifold 27 1
Exhaust manifold 18 6
Exhaust manifold(radiator cooling spec.) 31 3
Suction & exhaust manifold 12 1
Exhaust manifold & silencer 9 1
Exhaust manifold & silencer 38 1
Exhaust manifold 10 1
Exhaust manifold 13 1
Exhaust bend 5 1
Turbocharger 15 1
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: Engine No /# 01475
Turbo-charger 46 1
Exhaust manifold 16 1
C.s.w. pipe(emergency inlet)(optional) 23 1
C.W.2-PIPE system,sea water 12 3
Exhaust manifold 43-1 6
  • Interchangeability: old and new parts are interchangeable
  • Applies from: date 1992.07
Turbocharger 15 1
  • Part superseded, not shown on the diagram
  • Interchangeability: additional part
  • Applies from: Engine No /# 01652
Cooling sea water pipe(wesco) 44 1
  • NOT ILLUSTRATED:WATER SUCTION.
Exhaust manifold 10 2
Exhaust manifold & silencer 7 1
Exh.bend(6b) 5 2
  • Part superseded, not shown on the diagram
  • Interchangeability: part is discontinued
Cooling water pipe(6laalg) 76 1
Cooling water pipe(pump-cylinder) 64 1
  • OPTIONAL,NOT ILLUSTRATED.
Exhaust manifold 19 6
C.w.collcting pipe 10 1
C.w.pipe(cooler-distrib.pipe) 8 2
C.w.lines(land-use) 27 2
C.w.lines(land-use) 2 1
C.W.2-LINES(sea water) 12 3
C.W.2-WAY lines,fresh water 17 1
Cooling water pipe(previous) 10 1

Other parts of the “Exhaust bend” assembly, Yanmar 6HAL2-T

Open the assembly diagram