23887-160002 PLUG, 16 — YANMAR
40
The part position is highlighted in red on the diagram
- Part number: 23887-160002
- Manufacturer: Yanmar
- Name: PLUG, 16
- Weight: 38 g
- Length: 25 mm
- Width: 20 mm
- Height: 20 mm
The diagram shows the assembly “Lub.oil cooler” of the Yanmar 6HAL2 engine.
Where part 23887-160002 is used
Yanmar part 23887-160002 is used in 304 engine models. Assemblies: governor, cooling water pump, cylinder block and 62 more.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Governor | 81 | 1 | 4TNV106-GAGR4TNV106-GGB1BT4TNV106-GGE4TNV106-GGE24TNV106-GGEA4TNV106-GGEHC4TNV106GGB1B4TNV106T-GGB1T4TNV106T-GGE4TNV106T-GGE24TNV106T-GGEA4TNV106T-GGEHC4TNV106TGGB14TNV94L-BVSU4TNV94L-BVYU4TNV94L-BXPHZ4TNV94L-BXPYB4TNV94L-PLK4TNV94L-PLK24TNV94L-SFN24TNV94L-SLG4TNV94L-SLY4TNV94L-SSN4TNV94L-SSU4TNV94L-SXG4TNV94L-SXGA4TNV94L-SYU4TNV98-GGB1B4TNV98-GGE24TNV98-GGEC4TNV98-GGEH4TNV98-GGEHC4TNV98-GGEHR4TNV98-GPGE4TNV98-NLVC4TNV98-NXG4TNV98-PLYS4TNV98-SCKS4TNV98-SYU4TNV98-VDB244TNV98-WHB4TNV98-XKMR4TNV98T-GECS4TNV98T-GGEC4TNV98T-GGEHC4TNV98T-GKL4TNV98T-GPGE |
|
| Governor | 82 | 1 | ||
| Governor | 66 | 1 | ||
| Governor | 84 | 1 | ||
| Governor | 78 | 1 | ||
| Fuel injection pump | 83 | 1 | ||
| Governor | 83 | 1 | ||
| Governor(mechanical type) | 11 | 1 | ||
| Governor | 80 | 1 | ||
| Cooling water pump | 19 | 2 | ||
| Flywheel side cover & oil shield cover | 11 | 1 | ||
| Governor | 79 | 1 |
|
|
| Oil cooler housing | 15 | 1 | ||
| Gonernor | 80 | 1 | ||
| Fuel pipe(notch wire strainer-main pipe) | 10 | 1 | ||
| Fuel injection pump component | 83 | 1 | ||
| Lub. oil sump | 2 | 2 | ||
| Governor | 77 | 1 | ||
| Oil cooler case | 14 | 1 | ||
| Governor | 89 | 1 | ||
| Governor | 10 | 1 | ||
| Lub. oil cooler(non-priming) | 20 | 2 |
|
|
| Fuel injection pump(b) | 97 | 1 | ||
| L.o.cooler&press.regura.valve | 14 | 1 |
|
|
| Oil cooler | 15 | 1 | ||
| Governor | 11 | 1 | ||
| Oil cooler case | 16 | 1 | ||
| L.o.pipe(fuel pump pinion oiling)(7000 sec.oil spec) | 31 | 1 | ||
| Governor | 63 | 1 | ||
| Fuel injection pump(a) | 104 | 1 | ||
| Cooling water pump | 19-1 | 1 |
|
|
| Cooling water pump | 14 | 1 | ||
| Fuel injection pump(from OCT.2003) | 100 | 1 | ||
| Fuel pipe | 15 | 1 | ||
| Cooling water system | 17 | 1 | ||
| C.w.pipe(xr pump-cyl.)(t/c fw.side) | 21 | 1 |
|
|
| Lub.oil cooler | 32-1 | 1 |
|
|
| Governor | 65 | 1 | ||
| Lub.oil cooler & strainer | 26 | 1 | ||
| Cylinder block | 46 | 1 |
|
|
| Valve rocker arm support & bonnet | 48 | 12 |
|
|
| Governor | 75 | 1 |
|
|
| Fuel injection pump(a-bank)(mdo spec) | 128 | 1 | ||
| Cylinder block | 72 | 1 | ||
| Lub. oil cooler | 45 | 1 | ||
| Lub.oil pipe(out side) | 23-1 | 1 |
|
|
| Cylinder block | 85 | 1 | ||
| Thermostat & cooling w. line | 14 | 1 | ||
| Fuel injection pump(up to SEP.2003) | 104 | 1 | ||
| Thermostat & c.w.lines | 14 | 1 | ||
| Lub.oil sump | 11 | 1 | ||
| Oil cooler case | 13 | 1 | ||
| Governor link case(previous) | 27 | 1 | ||
| Cylinder head | 45 | 1 | ||
| Lub.oil cooler | 40 | 1 | ||
| Cylinder head & bonnet | 33 | 1 |
|
|
| Cylinder head | 32 | 1 | ||
| Cylinder head & bonnet | 32 | 1 | ||
| Govetnor case(governor motor/optional) | 54 | 1 | ||
| F.i.pump(mechanical type) | 83 | 1 | ||
| F.i.pump(goveronor motor type) | 83 | 1 | ||
| Governor(motor type) | 11 | 1 | ||
| Lub. oil sump | 2 | 1 | ||
| Governor case(governor motor) | 53 | 1 |
|
|
| Fuel injection pump(b-bank)(mdo spec) | 128 | 1 | ||
| C.w.collecting pipe | 14 | 1 | ||
| C.w.collecting pipe | 16 | 1 | ||
| Governor(mechanical type) | 79 | 1 | ||
| Lub.oil cooler | 48 | 1 | ||
| Flywheel housing | 15 | 1 | ||
| Governor | 72 | 1 | ||
| Oil cooler | 16 | 1 | ||
| Oil cooller case | 10 | 1 | ||
| Cooling water pump | 35 | 1 | ||
| Cylinder block | 38 | 1 | ||
| Governor | 79 | 1 | ||
| Cooling water pump | 22 | 1 | ||
| Lub. oil cooler(w/priming) | 20 | 2 |
|
|
| Governor(inner parts) | 66 | 1 | ||
| Cooling water pump | 38 | 1 | ||
| Oil cooler | 13 | 1 | ||
| Oil cooler case | 17 | 1 | ||
| Oil cooller | 16 | 1 | ||
| Oil cooler housing | 16 | 1 | ||
| Fuel injection pump(b) | 104 | 1 | ||
| Fuel injection pump(a) | 106 | 1 | ||
| Governor | 73 | 1 | ||
| Cylinder block | 36 | 1 | ||
| Governor | 84 | 1 |
|
|
| Oil cooller | 15 | 1 | ||
| Governor | 88 | 1 |
|
|
| Cooling water pipes | 2 | 1 |
|
|
| Covernor | 72 | 1 |
|
|
| Fuel pipe(2) | 15 | 1 | ||
| Lub.oil pipe & tank(h.o.governor) | 35 | 1 | ||
| Cylinder block | 29 | 2 | ||
| Fuel injection pump | 96 | 1 | ||
| Hyd.oil governor housing | 15 | 1 | ||
| Covernor | 76 | 1 |
|
|
| Lub. oil cooler | 26 | 1 | ||
| Governor | 89 | 1 |
|
|
| Oil cooler housing | 13 | 1 | ||
| Cooling water pump | 21 | 1 | ||
| Cylinder block | 46-1 | 1 |
|
|
| Oil cooler | 17 | 1 | ||
| Cylinder block | 46-1 | 1 |
|
|
| Lub.oil sump | 19 | 1 | ||
| Cylinder block | 46-1 | 1 |
|
|
| C.w.pipe(xr pump-cyl.)(t/c fw.side) | 21 | 1 |
|
|
| Lub.oil pipe(by-pass strainer) | 4 | 1 | ||
| Cylinder block | 35 | 1 |
|
|
| Cylinder block | 46-1 | 1 |
|
|
| Cooling water pipes | 2 | 1 |
|
|
| Fuel injection pump(b-bank)(mdo spec) | 128 | 2 | ||
| C.w.pipe(xr pump-cyl.)(t/c fw.side) | 21 | 1 |
|
|
| Cooling water pipes | 2 | 1 |
|
|
| Valve rocker arm support & bonnet | 48 | 12 |
|
|
| Lub. oil sump | 6 | 1 | ||
| Cooling water jacket cover | 10 | 1 |
|
|
| Lub.oil cooler | 13A | 1 | ||
| Lub.oil sump | 9 | 1 | ||
| Cooling water jacket cover | 10 | 1 |
|
|
| Lub.oil cooler | 47 | 1 |
|
|
| Cooling water pipe | 9 | 1 |
|
|
| Cooling water pipe | 9 | 1 |
|
|
| Lub. oil sump | 12 | 1 | ||
| Oil cooller | 17 | 1 | ||
| Gevernor | 84 | 1 |
|
|
| Governor(inner parts) | 65 | 1 | ||
| Governor | 76 | 1 | ||
| Oil coolar case | 15 | 1 | ||
| Oil cooler | 14 | 1 | ||
| Lub. oil pipe(l.o.by-pass strainer) | 5 | 1 | ||
| Blind cover(c.w.pump seat,l.o.main gallery) | 16 | 1 | ||
| Covernor | 79 | 1 |
|
|
| Cooling water pump | 36 | 1 |
|
|
| Cylinder block | 51 | 6 | ||
| Lub.oil sump | 6 | 1 | ||
| Cooling water pump | 10 | 1 | ||
| Lub.oil pipe(turbocharger) | 4 | 2 | ||
| Flywheel side cover & oil shield cover,blank.flange | 11 | 1 | ||
| Cw.pump(fc),clkw. | 14 | 2 | ||
| Valve rocker arm shaft support & bonnet,sensor seat | 36 | 12 | ||
| Cooling water system | 16 | 1 | ||
| Lub. oil cooler | 20 | 2 |
|
|
| Cooling water pump | 36 | 1 |
|
|
| Covernor | 73 | 1 | ||
| Governor | 75 | 1 | ||
| Lub.oil pipe(out side) | 59-1 | 1 |
|
|
| Cooling water system | 22 | 1 | ||
| Link cace(for s.g.governor) | 44 | 1 | ||
| Fo.pipe(strainer-main pipe) | 31 | 1 |
|
Other parts of the “Lub.oil cooler” assembly, Yanmar 6HAL2
- 2343600-500311Cock assy, 3/81 pcs
- 27-1726650-33723Cooler assy, oil1 pcs
- 27-2726650-33724Cooler assy, oil1 pcs
- 28126650-33021Gasket, cooler1 pcs
- 28-1126650-33023Gasket, cooler1 pcs
- 29126650-33031Cover1 pcs
- 30126650-33042Gasket, cover1 pcs
- 30-1126650-33043Gasket, cover1 pcs
- 31126650-33510Body, cooler1 pcs
- 31-1126650-33511Body, cooler1 pcs
- 32126650-33900Core assy1 pcs
- 32-1126650-33901Core assy1 pcs
- 33126650-33911Gasket2 pcs
- 33-1126650-33912Gasket2 pcs
- 33-224316-000280O-ring, 4DP28.02 pcs
- 33A24316-000080O-ring, 4DP8.04 pcs
- 34125613-35310Valve set, relief1 pcs
- 3522137-080000Washer, 81 pcs
- 3622217-080000Washer, spring 84 pcs
- 3726106-080302Bolt, M8X 30 plated1 pcs
- 3826366-080002Nut, M84 pcs
- 3923414-160000Gasket, 16X1.01 pcs
- 4126106-080552Bolt, M8X 55 plated7 pcs
- 4226116-081302Bolt, M8X130 plated11 pcs
- 4423010-017000Clamp, 171 pcs
- 4523061-120500Pipe, 12X 5001 pcs
