Yanmar parts catalogue / 194440-51620 CLAMP, B

194440-51620 CLAMP, B — YANMAR

Yanmar 194440-51620 CLAMP, B — position on the assembly diagram
21
The part position is highlighted in red on the diagram
  • Part number: 194440-51620
  • Manufacturer: Yanmar
  • Name: CLAMP, B
  • Weight: 7 g
  • Length: 10 mm
  • Width: 70 mm
  • Height: 20 mm

The diagram shows the assembly “Gear housing” of the Yanmar 6T95L-GB engine.

Check sellers for 194440-51620 on pFind.pro

Where part 194440-51620 is used

Yanmar part 194440-51620 is used in 150 engine models. Assemblies: spark system, gear housing, cooling fresh water system and 16 more.

Engine assemblyDiagram pos.QtyEngine modelsCatalogue notes
Spark system 1 2
Gears housing 23 1
Spark system 1 3
Panel 1 1
Panel 2 1
Flywheel magneto & starting device 58 1
  • Part superseded, not shown on the diagram
  • Interchangeability: part is discontinued
Flywheel magneto & starting device 64 1
Gear housing 23 1
Gear housing 21 1
Spark system 1 1
Gears housing 21 1
Gear housing 20 1
Cooling fresh water system 55 2
Fuel feed pump 28 1
Cooling fresh water system 38 2
Cooling water system 49 1
Fly.magneto & starting device(YGW150 series) 58 2
  • Interchangeability: part is discontinued
Gear housing 16 1
Gear housing 24 1
Radiator & fan 20 1
Exh.manifold & heat exchanger 35 1
Cooling fresh water system 44 2
Instrument panel 1 1
Fly.magneto & starting device(YGW180 series) 49 2
Exh.manifold & heat exchanger 55 1
Cooling fresh water system 52 2
Fuel pipe & fuel strainer 21 1
Cooling fresh water line 11 2
Cooling fresh water system 42 2
Radiator & fan 21 1
Exh.manifold & heat exchanger 33 1
Exh.manifold & heat exchanger 52 1
Fuel strainer & fuel pipe 18 1
Exh.manifold & heat exchanger 51 1
  • Interchangeability: additional part
Fuel feed pump 27 1
Exh.manifold & heat exchanger 32 1
Exh.manifold & heat exchanger 41 1
Fuel tank & fuel pipe 28 2
Compressor 10 1
Exh.manifold & heat exchanger 15-1 1
  • Interchangeability: old and new parts are interchangeable
Cooling fresh water system 26 2
Pulser 7A 1
  • Interchangeability: additional part
Exh.manifold & heat exchanger 50 2
  • Interchangeability: part is discontinued
Exh.manifold & heat exchanger 50 2
Exh.manifold & heat exchanger 35 1
  • Interchangeability: part is discontinued
Cooling fresh water system 35 2
Exh.manifold & heat exchanger 41 1
  • Interchangeability: part is discontinued
Cooling water system 53 1
Pulser 18 1
Cooling water system 40 1
Cooling fresh water line 10 2
Cooling water system 41 1
Exh.manifold & heat exchanger 17 1
  • Interchangeability: part is discontinued

Other parts of the “Gear housing” assembly, Yanmar 6T95L-GB

  Open the assembly diagram

Assemblies with this part