183329-48110 IMPELLER — YANMAR
10
The part position is highlighted in red on the diagram
- Part number: 183329-48110
- Manufacturer: Yanmar
- Name: IMPELLER
- Weight: 870 g
- Length: 120 mm
- Width: 120 mm
- Height: 60 mm
The diagram shows the assembly “Pump(semi-trash)” of the Yanmar YSP20STE engine.
Where part 183329-48110 is used
Yanmar part 183329-48110 is used in 2 engine models. Assemblies: pump(semi-trash), water pump(semi-trash).
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Pump(semi-trash) | 10 | 1 | ||
| Water pump(semi-trash) | 16 | 1 |
Other parts of the “Pump(semi-trash)” assembly, Yanmar YSP20STE
- 1183329-48050Casing1 pcs
- 3183178-48060Gasket1 pcs
- 4183329-48560Bolt w/sw4 pcs
- 5183329-48070Cascing cover1 pcs
- 6160664-95530Bolt m 8x 504 pcs
- 7183178-48080Gasket seal4 pcs
- 8X501007Spring washer 84 pcs
- 9X501008Washer 84 pcs
- 12X521008Mechanical seal1 pcs
- 13183329-48130Inner casig1 pcs
- 15183178-48140Gasket1 pcs
- 17X501013Valve case1 pcs
- 19160664-95610Bolt M8X 257 pcs
- 21183178-48160Check valve1 pcs
- 23X501016Hose coupling handle2 pcs
- 25183178-48210Gasket2 pcs
- 27X501018PHose coupling2 pcs
- 29X501019Bend, discharge1 pcs
- 31183178-48260Gasket1 pcs
- 34183178-48270Plug2 pcs
- 35183178-48280Gasket2 pcs
- 36183329-92820Hook1 pcs
- 37183329-92810Wrench, socket1 pcs
- 40X502026Caution plate1 pcs
- 41X579027Capacity plate1 pcs
- 43183329-08210Bolt w/sw4 pcs
- 44183329-08310Nut, frange4 pcs
- 45X579030Frame1 pcs
- 47183178-48350Clamp3 pcs
- 49X571029Strainer1 pcs
- 51183329-48360Strainer (npt)1 pcs
