183081-48010 CASE — YANMAR
11
The part position is highlighted in red on the diagram
- Part number: 183081-48010
- Manufacturer: Yanmar
- Name: CASE
- Weight: 4450 g
- Length: 470 mm
- Width: 510 mm
- Height: 160 mm
The diagram shows the assembly “Pump set (ydp30dn)” of the Yanmar YDP30DN engine.
Where part 183081-48010 is used
Yanmar part 183081-48010 is used in 1 engine model. Assembly: pump set (ydp30dn).
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Pump set (YDP30DN) | 11 | 1 |
Other parts of the “Pump set (YDP30DN)” assembly, Yanmar YDP30DN
- 1183081-98010Pump set1 pcs
- 2183081-08510Base set1 pcs
- 3183081-01010Frame1 pcs
- 4183080-08010Absorber2 pcs
- 5183080-08020Absorber4 pcs
- 6183080-48260Bolt4 pcs
- 722117-080000Washer, 84 pcs
- 822217-080000Washer, spring 84 pcs
- 926051-080002Nut, M88 pcs
- 10183081-48510Pump set1 pcs
- 12183081-48020Cover1 pcs
- 13183081-48030Flange1 pcs
- 14183081-48040Bend1 pcs
- 15183081-48050Chamber1 pcs
- 16183081-48060Diaphragm1 pcs
- 17183081-48070Rod1 pcs
- 18183081-48080Cap1 pcs
- 19183081-48090Valve, check2 pcs
- 20183080-48100Case, gear1 pcs
- 21183080-48110Cover1 pcs
- 22183078-48120Plug1 pcs
- 23183080-48120Cover1 pcs
- 24183078-48130O-ring1 pcs
- 25183078-48140Fitting2 pcs
- 26183080-48140Gear assy1 pcs
- 27183080-48160Gasket1 pcs
- 28183080-48170Collar2 pcs
- 29183080-48180Key1 pcs
- 30183080-48190Nipple, grease1 pcs
- 31183080-48240Bearing, needle1 pcs
- 32183080-48250Washer1 pcs
- 3322117-100000Washer, 103 pcs
- 3422213-050000Washer, spring 53 pcs
- 3624311-000800O-ring, 1AP80.01 pcs
- 3726013-080259Bolt, M8X 258 pcs
- 3826013-100404Bolt, M10X 401 pcs
- 3926014-080304Bolt, 8 x 304 pcs
- 4026014-100302Bolt, M10X 303 pcs
- 4126453-080162Bolt, M8X 161 pcs
- 4226646-050102Bolt, wing M5X103 pcs
- 43183078-98510Parts assy,accessory1 pcs
- 44183072-48090Handle2 pcs
- 45183078-48100Coupling2 pcs
- 46183072-48110Gasket2 pcs
- 47183078-48110Strainer1 pcs
- 48183072-48130Band3 pcs
- 490AYDP-G00200Operation manual1 pcs