183078-48060 IMPELLER — YANMAR
18
The part position is highlighted in red on the diagram
- Part number: 183078-48060
- Manufacturer: Yanmar
- Name: IMPELLER
- Weight: 1500 g
- Length: 150 mm
- Width: 150 mm
- Height: 150 mm
The diagram shows the assembly “Pump set (ydp30tn)” of the Yanmar YDP30TN engine.
Where part 183078-48060 is used
Yanmar part 183078-48060 is used in 1 engine model. Assembly: pump set (ydp30tn).
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Pump set (YDP30TN) | 18 | 1 |
Other parts of the “Pump set (YDP30TN)” assembly, Yanmar YDP30TN
- 1183078-98010Pump set1 pcs
- 2183078-08510Base set1 pcs
- 3183078-01010Frame1 pcs
- 4183078-08010Base1 pcs
- 5183078-48190Spacer2 pcs
- 626013-100452Bolt, M10X 454 pcs
- 726013-100504Bolt, M10X 502 pcs
- 826367-100002Nut, M104 pcs
- 926377-100002Nut, M108 pcs
- 10183078-48510Pump set1 pcs
- 11183076-48010Seal, mechanical1 pcs
- 12183078-48010Case1 pcs
- 13183078-48020Cover1 pcs
- 14183078-48030Case1 pcs
- 15183078-48040Bend1 pcs
- 16183078-48050Case1 pcs
- 17183072-48060Gasket1 pcs
- 19183078-48070Valve, check1 pcs
- 20183078-48080O-ring, G801 pcs
- 21183078-48090O-ring, G2401 pcs
- 22183078-48120Plug2 pcs
- 23183078-48130O-ring2 pcs
- 24183077-48140Liner1 pcs
- 25183078-48140Fitting2 pcs
- 26183078-48150Knob2 pcs
- 27183078-48160Holder2 pcs
- 28183078-48170Pin2 pcs
- 29183078-48180Rivet2 pcs
- 30183078-48220Bolt2 pcs
- 31183078-48250Washer4 pcs
- 3222213-060000Washer, spring 63 pcs
- 3322213-080000Washer, spring 83 pcs
- 3426013-100302Bolt, M10X 307 pcs
- 3526106-080452Bolt, M8X 45 plated4 pcs
- 3626453-060202Bolt, M6X 203 pcs
- 3726453-080302Bolt, M8X 303 pcs
- 38183078-98510Parts assy,accessory1 pcs
- 39183072-48090Handle2 pcs
- 40183078-48100Coupling2 pcs
- 41183072-48110Gasket2 pcs
- 42183078-48110Strainer1 pcs
- 43183072-48130Band3 pcs
- 440AYDP-G00200Operation manual1 pcs