148016-43550 IMPELLER, PUMP — YANMAR
6
The part position is highlighted in red on the diagram
- Part number: 148016-43550
- Manufacturer: Yanmar
- Name: IMPELLER, PUMP
- Weight: 1070 g
- Length: 138 mm
- Width: 138 mm
- Height: 41 mm
The diagram shows the assembly “Cooling fresh water pump” of the Yanmar 12LAALC-DT engine.
Where part 148016-43550 is used
Yanmar part 148016-43550 is used in 1 engine model. Assembly: cooling fresh water pump.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Cooling fresh water pump | 6 | 1 |
Other parts of the “Cooling fresh water pump” assembly, Yanmar 12LAALC-DT
- 1748016-43100Pump assy, water1 pcs
- 2148016-43020Cover, pump1 pcs
- 3148606-43031Gasket1 pcs
- 4148633-43400Seal, mechanical1 pcs
- 7148616-43560Shaft1 pcs
- 8148616-43630Spacer1 pcs
- 9148616-43640Joint, pipe1 pcs
- 10148816-43700Gear, pump1 pcs
- 11148616-54420Seal, TC324881 pcs
- 1226732-200002Nut, M201 pcs
- 1322137-200000Washer, 201 pcs
- 1422217-200000Washer, spring 201 pcs
- 1522252-000620Ring, 621 pcs
- 1622512-070202Key, 7x 201 pcs
- 1723414-130000Gasket, 13X1.02 pcs
- 1823897-020002Plug G1/42 pcs
- 1924101-063054Bearing, ball 63051 pcs
- 2024102-062054Bearing, ball 6205U1 pcs
- 2126106-100252Bolt, M10X 25 plated9 pcs
- 2226366-100002Nut, M101 pcs
- 23148606-01811Gasket, (non-asb.)1 pcs
- 2423010-018000Clamp, 181 pcs
- 2523061-120600Pipe, 12X 6001 pcs