132654-66880 BEARING STAND — YANMAR
8
The part position is highlighted in red on the diagram
- Part number: 132654-66880
- Manufacturer: Yanmar
- Name: BEARING STAND
The diagram shows the assembly “Speed controller(ug8 governor)” of the Yanmar 6N330 engine.
Where part 132654-66880 is used
Yanmar part 132654-66880 is used in 1 engine model. Assembly: speed controller(ug8 governor).
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Speed controller(UG8 governor) | 8 | 6 |
Other parts of the “Speed controller(UG8 governor)” assembly, Yanmar 6N330
- 1132654-66700Shaft 1st sfw.1 pcs
- 2132654-66710Shaft 1st center4 pcs
- 3132654-66720Shaft 1st ofw.1 pcs
- 4132654-66740Joint5 pcs
- 526206-100302Bolt, M10X 30 plated10 pcs
- 622512-070200Key, 7x 2010 pcs
- 724162-283520Bearing, 2835208 pcs
- 9132654-66941Bearing stand1 pcs
- 1026206-120302Bolt, M12X 30 plated14 pcs
- 11138613-66760Needle bearing1 pcs
- 12138987-66860Bearing case,lever1 pcs
- 1326206-080202Bolt, M8X 20 plated2 pcs
- 14132654-668001st lever6 pcs
- 1522312-060320Pin, parallel M6X326 pcs
- 16132654-66820Retainer6 pcs
- 17132654-66830Spring6 pcs
- 18132654-66840Collar,thrust6 pcs
- 19132654-66850Spring holder6 pcs
- 20132654-66810Retainer6 pcs
- 2222212-080000Washer 86 pcs
- 2322351-080040Pin, spring 8.0X4012 pcs
- 24132654-66900Joint6 pcs
- 25132654-66910Bolt6 pcs
- 26132654-66920Spring6 pcs
- 2726796-080002Nut, lock M86 pcs
- 28132654-666002nd lever1 pcs
- 2922322-080500Pin, taper 8X501 pcs
- 30132654-66480Joint1 pcs
- 3126796-120002Nut, lock M121 pcs
- 32132654-66860Lever1 pcs
- 33132654-66870Screw1 pcs
- 3426706-100002Nut, M101 pcs
- 3522451-100100Wire, 1.0X 1001 pcs
- 36135210-61090Lead1 pcs
- 37138613-66920Spring1 pcs
- 3826577-040082Screw, M4X 81 pcs
- 39132654-66890Lever1 pcs