129E00-14700 PULSER, CAM GEAR — YANMAR
8
The part position is highlighted in red on the diagram
- Part number: 129E00-14700
- Manufacturer: Yanmar
- Name: PULSER, CAM GEAR
- Weight: 150 g
- Length: 110 mm
- Width: 110 mm
- Height: 15 mm
The diagram shows the assembly “Camshaft & driving gear” of the Yanmar 4TNV98CT-WTB engine.
Where part 129E00-14700 is used
Yanmar part 129E00-14700 is used in 9 engine models. Assembly: camshaft & driving gear.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Camshaft & driving gear | 8 | 1 |
Other parts of the “Camshaft & driving gear” assembly, Yanmar 4TNV98CT-WTB
- 1129150-14200Tappet8 pcs
- 2129900-14400Rod, push8 pcs
- 3129E00-14581Shaft assy, cam1 pcs
- 4129150-02450Bearing, thrust1 pcs
- 6129E00-14101Gear, camshaft1 pcs
- 722512-070140Key, 7x 141 pcs
- 922351-030010Pin, spring 3.0X101 pcs
- 1026106-080162Bolt, M8X 16 plated2 pcs
- 1126577-060122Screw, M6X122 pcs
- 12129A00-14710Sensor, gear rev1 pcs
- 1326450-060162Bolt, M6X 161 pcs
- 14129E00-25050Shaft, idle gear a1 pcs
- 15129900-25110Gear assy, idle1 pcs
- 1826106-080502Bolt, M8X 50 plated3 pcs
- 19129E00-25902Gear, supply pump1 pcs
- 2022217-180000Washer, spring 181 pcs
- 2126776-180002Nut, lock M181 pcs
- 22129E00-25060Shaft, idle gear b1 pcs
- 23129E00-25121Gear assy, idle b1 pcs
- 26129E00-25200Plate, idle shaft b1 pcs
- 2726106-080452Bolt, M8X 45 plated3 pcs
- 28129E00-25400Pipe assy, lo1 pcs
- 29105010-39140Bolt, pipe joint2 pcs
- 3022190-080002Washer, seal 64 pcs
- 31129150-25920Bush, idle gear1 pcs
- 32129E00-25080Bush1 pcs
