129E00-12800 COLLECTOR — YANMAR
15
The part position is highlighted in red on the diagram
- Part number: 129E00-12800
- Manufacturer: Yanmar
- Name: COLLECTOR
- Weight: 1442 g
- Length: 310 mm
- Width: 175 mm
- Height: 112 mm
The diagram shows the assembly “Suction manifold” of the Yanmar 4TNV98C-PJLW25 engine.
Where part 129E00-12800 is used
Yanmar part 129E00-12800 is used in 7 engine models. Assembly: suction manifold.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Suction manifold | 15 | 1 |
Other parts of the “Suction manifold” assembly, Yanmar 4TNV98C-PJLW25
- 1129005-03080Pipe , breather1 pcs
- 2129410-03990Clip,hose 21.52 pcs
- 3129E00-12110Gasket, manifold1 pcs
- 4129E00-12151Manifold assy,intake1 pcs
- 5129E00-12101Manifold, air intake1 pcs
- 626216-060202Stud, M6X 202 pcs
- 7129A00-12720Sensor,air temp1 pcs
- 826106-080452Bolt, M8X 45 plated1 pcs
- 926106-080552Bolt, M8X 55 plated4 pcs
- 10129E00-12810Gasket, collector1 pcs
- 11129E00-12850Collector assy1 pcs
- 12119660-01570Stud, M6X121 pcs
- 13129A00-12711Sensor,air temp1 pcs
- 14129A00-12790O-ring,temp sensor1 pcs
- 16129E00-13710Spacer, egr valve1 pcs
- 17129E00-13720Gasket, egr-v spacer1 pcs
- 18129A00-59110Joint, hose M141 pcs
- 19129E00-59120Joint, hose 141 pcs
- 2022190-140002Washer, seal 142 pcs
- 2126106-080352Bolt, M8X 35 plated4 pcs
- 2326716-060002Nut, M61 pcs
- 2426106-080752Bolt, M8X 75 plated1 pcs
- 2526106-080902Bolt, M8X 90 plated2 pcs
- 2626216-081002Stud, M8X1002 pcs
- 2726306-080002Nut, M82 pcs
- 28129A00-12820Bend, inlet1 pcs
- 29129A00-12900Throttle body(int1 pcs
- 30129A00-12910Gasket,throttle2 pcs
- 3126106-060202Bolt, M6X 20 plated2 pcs
- 3226106-060402Bolt, M6X 40 plated4 pcs
- 3326106-060902Bolt, M6X 90 plated2 pcs
