129A00-14700 PULSER, CAMSHAFT — YANMAR
8
The part position is highlighted in red on the diagram
- Part number: 129A00-14700
- Manufacturer: Yanmar
- Name: PULSER, CAMSHAFT
- Weight: 100 g
- Length: 110 mm
- Width: 110 mm
- Height: 10 mm
The diagram shows the assembly “Camshaft & driving gear” of the Yanmar 3TNV88C-DYEM engine.
Where part 129A00-14700 is used
Yanmar part 129A00-14700 is used in 10 engine models. Assembly: camshaft & driving gear.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Camshaft & driving gear | 8 | 1 | ||
| Camshaft & driving gear | 9 | 1 |
Other parts of the “Camshaft & driving gear” assembly, Yanmar 3TNV88C-DYEM
- 1129150-14200Tappet6 pcs
- 2129150-14400Rod, push l=1786 pcs
- 3129A00-14580Camshaft assy1 pcs
- 4129150-02450Bearing, thrust1 pcs
- 6129A00-14100Gear,camshaft1 pcs
- 722512-070140Key, 7x 141 pcs
- 926106-060102Bolt, M6X 10 plated3 pcs
- 1026106-080142Bolt, M8X 14 plated2 pcs
- 11129A00-14710Sensor, gear rev1 pcs
- 1226450-060162Bolt, M6X 161 pcs
- 13129A00-25050Shaft, idle gear a1 pcs
- 14129A00-25110Gear assy, idle a1 pcs
- 1726106-080452Bolt, M8X 45 plated3 pcs
- 18129A00-25900Gear, supply pump1 pcs
- 1922217-180000Washer, spring 181 pcs
- 2026776-180002Nut, lock M181 pcs
- 21129A00-25060Shaft, idle gear b1 pcs
- 22129A00-25120Gear assy, idle b1 pcs
- 25129A00-25200Plate, idle shaft b1 pcs
- 26129A00-25210Gasket, idle shaft b1 pcs
- 2726106-080402Bolt, M8X 40 plated2 pcs
- 28129A88-26000Drive assy, ho-p1 pcs
- 29129484-26210Gear assy1 pcs
- 3224105-060064Bearing, ball 6006Z2 pcs
- 33119802-25071Bush, idle gear1 pcs
- 34129A00-25080Bush1 pcs
