Yanmar parts catalogue / 129410-77330 ADJUSTER, BELT

129410-77330 ADJUSTER, BELT — YANMAR

Yanmar 129410-77330 ADJUSTER, BELT — position on the assembly diagram
5
The part position is highlighted in red on the diagram
  • Part number: 129410-77330
  • Manufacturer: Yanmar
  • Name: ADJUSTER, BELT
  • Weight: 250 g
  • Length: 180 mm
  • Width: 40 mm
  • Height: 20 mm

The diagram shows the assembly “Generator” of the Yanmar 3TN82E-S engine.

Check sellers for 129410-77330 on pFind.pro

Where part 129410-77330 is used

Yanmar part 129410-77330 is used in 162 engine models. Assemblies: generator, tension pulley, cooling fresh water system and 8 more.

Engine assemblyDiagram pos.QtyEngine modelsCatalogue notes
Generator 25 1
Generator 23 1
Generator 31 1
Generator 1 1
Generator 22 1
Generator 11 1
Cooling sea water system 42 1
Generator 17 1
Generator 25- 1 1
  • Interchangeability: new part number replaces the old one, not vice versa
Generator 26 1
Generator(component parts) 25 1
Generator 4 1
Generator 27 1
Cooling sea water system 29 1
Cooling sea water pump 29 1
Tension pulley 7 1
Generator(component parts) 27 1
Cooling fresh water system 54 1
Generator 25 1
  • Part superseded, not shown on the diagram
(15A)generator 29 1
Cooling fresh water system 55 1
Generator 22-1 1
  • Part superseded, not shown on the diagram
  • Interchangeability: new part number replaces the old one, not vice versa
  • Applies from: Engine No /# 25234
Tension pulley 7-1 1
  • Interchangeability: replaced as a set, see note
  • Applies from: Engine No 04245
  • Interchangeable by simultaneous replacement with Fig.13 Ref.No.2-1 and Fig.14 Ref.No.1-1.
Tension pulley 7-1 1
  • Interchangeability: replaced as a set, see note
  • Applies from: Engine No 25228
  • Interchangeable by simultaneous replacement with Fig.13 Ref.No.2-1 and Fig.14 Ref.No.1-1.
Generator 23 1
  • Part superseded, not shown on the diagram
Generator 22-1 1
  • Part superseded, not shown on the diagram
  • Interchangeability: new part number replaces the old one, not vice versa
  • Applies from: Engine No /# 04249
Generator 30 1
Cooling fresh water system 48 1
(16A)generator 29 1
Generator 20 1
Generator 22-1 1
  • Part superseded, not shown on the diagram
  • Interchangeability: new part number replaces the old one, not vice versa
  • Applies from: Engine No /# 25229
Starting motor 31 1
  • Interchangeability: additional part
Generator 22-1 1
  • Interchangeability: replaced as a set, see note
  • Interchangeable by simultaneous replacement with Fig.12 Ref.No.1-1, 19-1.
Tension pulley 7-1 1
  • Interchangeability: replaced as a set, see note
  • Applies from: Engine No 04248
  • Interchangeable by simultaneous replacement with Fig.12 Ref.No.1-1, 20-1.
Cooling fresh water system 45 1
Generator(component part) 20-1 1
  • Interchangeability: replaced as a set, see note
  • Applies from: FZZZZZ
  • Interchangeable by simultaneous replacement with Fig.15 Ref.No.4-2, 19-1.
Generator 23-1 1
  • Interchangeability: replaced as a set, see note
  • Interchangeable by simultaneous replacement with Fig.10 Ref.No.2-2, Fig.11 Ref.No.1-1.
Generator 22-1 1
  • Part superseded, not shown on the diagram
  • Interchangeability: new part number replaces the old one, not vice versa
  • Applies from: Engine No /# 71025
Tension pulley 8 1
Generator 5-1 1
  • Part superseded, not shown on the diagram
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: Engine No /# 00664
  • SIMULTANEOUS REPLACEMENT OF FIG. 50.REF.NO.5-1 & FIG.34.REF.NO.2-1 ARE INTERCHANGEABLE.
Generator(component parts) 3 1
Tension pulley 7-1 1
  • Interchangeability: replaced as a set, see note
  • Interchangeable by simultaneous replacement with Fig.11 Ref.No.2-1, Fig.13 Ref.No.1-1.
Generator 22-1 1
  • Part superseded, not shown on the diagram
  • Interchangeability: new part number replaces the old one, not vice versa
  • Applies from: Engine No /# 71679
Tension pulley 7-1 1
  • Interchangeability: replaced as a set, see note
  • Applies from: Engine No 71601
  • Interchangeable by simultaneous replacement with Fig.13 Ref.No.2-1 and Fig.14 Ref.No.1-1.
Generater(component part) 27-1 1
  • Interchangeability: new part number replaces the old one, not vice versa
  • Applies from: Engine No /# 03145
Generator 5-1 1
  • Part superseded, not shown on the diagram
  • Interchangeability: old and new parts are not interchangeable
  • Applies from: Engine No /# 00524
  • SIMULTANEOUS REPLACEMENT OF FIG. 50.REF.NO.5-1 & FIG.34.REF.NO.2-1 ARE INTERCHANGEABLE.
Tension pulley 7-1 1
  • Interchangeability: replaced as a set, see note
  • Interchangeable by simultaneous replacement with Fig.33 Ref.No.2-1, Fig.35 Ref.No.1-1.
Cooling fresh water system 41 1
Generator 28 1
  • Part superseded, not shown on the diagram
Cooling fresh water system 53 1
Generator(component part) 20-1 1
  • Interchangeability: replaced as a set, see note
  • Applies from: Engine No 21589
  • Interchangeable by simultaneous replacement with Fig.15 Ref.No.4-2, 19-1.

Other parts of the “Generator” assembly, Yanmar 3TN82E-S

Open the assembly diagram

Assemblies with this part