126625-49550 BEND, ENGINE INLET — YANMAR
7
The part position is highlighted in red on the diagram
- Part number: 126625-49550
- Manufacturer: Yanmar
- Name: BEND, ENGINE INLET
- Weight: 580 g
- Length: 267 mm
- Width: 93 mm
- Height: 71 mm
The diagram shows the assembly “C.w.pipepump-cyl.& air cooler)” of the Yanmar 6HAL2-HTP engine.
Where part 126625-49550 is used
Yanmar part 126625-49550 is used in 4 engine models. Assemblies: c.w.pipepump-cyl.& air cooler), (27d)cooling water pipe(pump - cylindr, cooler)(radiator spec).
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| C.w.pipepump-cyl.& air cooler) | 7 | 1 | ||
| (27D)cooling water pipe(pump - cylindr, cooler)(radiator spec) | 7 | 1 |
Other parts of the “C.w.pipepump-cyl.& air cooler)” assembly, Yanmar 6HAL2-HTP
- 1126630-49430Hose, rubber1 pcs
- 6126625-49500Bend1 pcs
- 824321-000550O-ring, 1AG55.01 pcs
- 926106-080202Bolt, M8X 20 plated2 pcs
- 1043730-552171Clip hose,714 pcs
- 12126660-49440Gasket1 pcs
- 13126625-49450Bend1 pcs
- 14126655-49470Pipe, water1 pcs
- 15126655-49480Pipe, rubber1 pcs
- 1623691-020010Cock, 1/81 pcs
- 1726106-080302Bolt, M8X 30 plated4 pcs
- 1841649-500300Joint1 pcs
- 1943730-552161Clip hose,614 pcs
- 21126660-49410Bend1 pcs
- 21-1126660-49390Bend1 pcs
- 23126660-49581Support1 pcs
- 23-1126660-49582Support(pipe1 pcs
- 24126665-49600Pipe assy, water1 pcs
- 2926106-080252Bolt, M8X 25 plated2 pcs
- 3026106-080752Bolt, M8X 75 plated2 pcs
- 3126106-100162Bolt, M10X 16 plated2 pcs
- 3226346-080002Nut, M82 pcs
- 3326464-040000U-bolt, 401 pcs
