126618-43050 IMPELLER, PUMP — YANMAR
9
The part position is highlighted in red on the diagram
- Part number: 126618-43050
- Manufacturer: Yanmar
- Name: IMPELLER, PUMP
- Weight: 650 g
- Length: 116 mm
- Width: 116 mm
- Height: 42 mm
The diagram shows the assembly “Cooling water pump” of the Yanmar 6HAL2C engine.
Where part 126618-43050 is used
Yanmar part 126618-43050 is used in 15 engine models. Assemblies: cooling water pump, cooling fresh water pump, c.f.w.pump(radiator spec).
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Cooling water pump | 9 | 1 | ||
| C.f.w.pump(radiator spec) | 4 | 1 | ||
| Cooling fresh water pump | 4 | 1 | ||
| Cooling fresh water pump | 8 | 1 |
Other parts of the “Cooling water pump” assembly, Yanmar 6HAL2C
- 1-2126628-43120Pump assy, water1 pcs
- 2-124421-304508Seal, oil TC3045081 pcs
- 3-2126628-43010Case, pump1 pcs
- 4-1126628-42120Shaft1 pcs
- 6-1126650-42161Seal, mechanical1 pcs
- 7126650-42301Joint, drain1 pcs
- 8-124104-062064Bearing, ball 6206UU1 pcs
- 10126616-43060Nut1 pcs
- 11-1126628-44771V-pulley1 pcs
- 1222137-200000Washer, 201 pcs
- 13-122252-000800Ring, 801 pcs
- 14-122512-070360Key, 7x 361 pcs
- 1523414-130000Gasket, 13X1.01 pcs
- 1623897-020002Plug G1/41 pcs
- 17-224104-063070Bearing, 6307UUC31 pcs
- 18A24311-000220O-ring, 1AP22.01 pcs
- 19126650-01950Stud, M8X653 pcs
- 20126650-42031Gasket, pump1 pcs
- 2123010-012000Clamp, 121 pcs
- 2223061-070700Pipe, 7x 7001 pcs
- 2326106-080502Bolt, M8X 50 plated5 pcs
- 2426366-080002Nut, M83 pcs
- 25-1126650-44781V-belt2 pcs
