126450-42050 IMPELLER, PUMP — YANMAR
4
The part position is highlighted in red on the diagram
- Part number: 126450-42050
- Manufacturer: Yanmar
- Name: IMPELLER, PUMP
- Weight: 670 g
- Length: 113 mm
- Width: 113 mm
- Height: 39 mm
The diagram shows the assembly “Cooling water pump” of the Yanmar 4HAL(A01) engine.
Where part 126450-42050 is used
Yanmar part 126450-42050 is used in 5 engine models. Assembly: cooling water pump.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Cooling water pump | 4 | 1 |
|
Other parts of the “Cooling water pump” assembly, Yanmar 4HAL(A01)
- 1726450-42700Pump assy, water1 pcs
- 3125110-01830Oil seal TC38-50-81 pcs
- 5126650-42060Shaft, impeller1 pcs
- 6126650-42070Spacer1 pcs
- 7126650-42080Nut1 pcs
- 8126650-42160Seal, mechanical1 pcs
- 9126650-42250Shim (t=0.1)2 pcs
- 10126650-42260Shim (t=0.3)1 pcs
- 11126650-42300Joint1 pcs
- 12126650-42700Bearing1 pcs
- 1322127-200000Washer 201 pcs
- 1422252-000620Ring, 621 pcs
- 1522417-400400Pin, cotter 4.0X401 pcs
- 1622512-070500Key, 7x 501 pcs
- 1723414-130017Gasket, 13X1.02 pcs
- 1823897-020002Plug G1/42 pcs
- 1924105-062064Bearing, ball 6206Z1 pcs
- 2024764-010000Nipple, grease M6F1 pcs
- 2123010-012000Clamp, 121 pcs
- 2223061-070700Pipe, 7x 7001 pcs
- 23126650-01950Stud, M8X653 pcs
- 24126650-42030Gasket, pump1 pcs
- 2526106-080502Bolt, M8X 50 plated5 pcs
- 2626366-080002Nut, M83 pcs