124610-43130 IMPELLER, PUMP — YANMAR
3
The part position is highlighted in red on the diagram
- Part number: 124610-43130
- Manufacturer: Yanmar
- Name: IMPELLER, PUMP
- Weight: 442 g
- Length: 105 mm
- Width: 105 mm
- Height: 28 mm
The diagram shows the assembly “Cooling water pump” of the Yanmar 6T95L-GB engine.
Where part 124610-43130 is used
Yanmar part 124610-43130 is used in 10 engine models. Assemblies: cooling water pump, cooling water pump & lines.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Cooling water pump | 3 | 1 | ||
| Cooling water pump & lines | 3 | 1 |
Other parts of the “Cooling water pump” assembly, Yanmar 6T95L-GB
- 1A124610-43010Pump assy, water1 pcs
- 1A-1124610-43011Pump assy, water1 pcs
- 4124610-43110Cover1 pcs
- 4-1124610-43111Cover1 pcs
- 5124610-43140Shaft, impeller1 pcs
- 5-1123500-42220Shaft1 pcs
- 6124610-43120Gasket1 pcs
- 6-1124610-43121Gasket1 pcs
- 7A124610-43230V-pulley1 pcs
- 7A-1124610-43231V-pulley1 pcs
- 8124250-42350Seal, mechanical1 pcs
- 9124610-43180Piece, distance1 pcs
- 1024102-063054Bearing, ball 6305U1 pcs
- 1124102-062054Bearing, ball 6205U1 pcs
- 1222252-000620Ring, 621 pcs
- 12-122252-000420Ring, 421 pcs
- 1326577-080142Screw m 8x 143 pcs
- 13-126577-080162Screw, M8X163 pcs
- 1426776-220002Nut, lock M221 pcs
- 1522117-220000Washer, 201 pcs
- 1622512-070180Key, 7x 181 pcs
- 1724764-020000Nipple, grease R1/81 pcs
- 18124610-43250Gasket, water pump1 pcs
- 1926106-080402Bolt, M8X 40 plated1 pcs
- 2026106-080502Bolt, M8X 50 plated2 pcs
- 2126106-080902Bolt, M8X 90 plated1 pcs
- 21-126106-080852Bolt, M8X 85 plated1 pcs
