124411-43120 IMPELLER, PUMP — YANMAR
3
The part position is highlighted in red on the diagram
- Part number: 124411-43120
- Manufacturer: Yanmar
- Name: IMPELLER, PUMP
- Weight: 300 g
- Length: 84 mm
- Width: 84 mm
- Height: 30 mm
The diagram shows the assembly “Cooling fresh water pump” of the Yanmar 6PHE engine.
Where part 124411-43120 is used
Yanmar part 124411-43120 is used in 2 engine models. Assembly: cooling fresh water pump.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Cooling fresh water pump | 3 | 1 |
Other parts of the “Cooling fresh water pump” assembly, Yanmar 6PHE
- 1124611-43100Pump assy, water1 pcs
- 2124611-43090Case1 pcs
- 4124611-43130Cover1 pcs
- 5127610-43301Shaft1 pcs
- 6124611-43150Gasket1 pcs
- 7124611-43160V-pulley1 pcs
- 8124250-42350Seal, mechanical1 pcs
- 922252-000620Ring, 621 pcs
- 10126650-42301Joint, drain1 pcs
- 1123871-020000Plug, R021 pcs
- 1226577-080152Screw, M8X153 pcs
- 1323871-030000Plug, R031 pcs
- 14120130-49350Cock, 1/41 pcs
- 15124611-43110Gasket, water pump1 pcs
- 1626106-080402Bolt, M8X 40 plated2 pcs
- 1726106-080852Bolt, M8X 85 plated4 pcs
- 1826212-080222Stud M8X222 pcs
- 1926366-080002Nut, M82 pcs