119000-25050 SHAFT, IDLE GEAR — YANMAR
10
The part position is highlighted in red on the diagram
- Part number: 119000-25050
- Manufacturer: Yanmar
- Name: SHAFT, IDLE GEAR
- Weight: 480 g
- Length: 80 mm
- Width: 65 mm
- Height: 50 mm
The diagram shows the assembly “Camshaft & driving gear” of the Yanmar 4TN100E-G1 engine.
Where part 119000-25050 is used
Yanmar part 119000-25050 is used in 42 engine models. Assemblies: camshaft & driving gear, cylinder block, camshaft & drive gear.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Camshaft & driving gear | 9 | 1 | ||
| Cylinder block | 21 | 1 | ||
| Camshaft & driving gear | 13 | 1 | ||
| Camshaft & drive gear | 13 | 1 | ||
| Camshaft & driving gear | 10 | 1 | ||
| Camshaft & drive gear | 10 | 1 | ||
| Cylinder block | 20 | 1 | ||
| Camshaft & drive gear | 9 | 1 | ||
| Cylinder block | 13 | 1 |
Other parts of the “Camshaft & driving gear” assembly, Yanmar 4TN100E-G1
- 1119100-14000Camshaft assy1 pcs
- 2119000-02450Bearing, thrust1 pcs
- 5119000-14100Gear, camshaft z=481 pcs
- 622512-070140Key, 7x 141 pcs
- 7119000-14200Tappet8 pcs
- 8129150-14400Rod, push l=1788 pcs
- 926106-080162Bolt, M8X 16 plated2 pcs
- 11119000-25100Gear assy, idle z=511 pcs
- 14119000-25930Bush, idle gear1 pcs
- 1526013-080452Bolt, M8X 452 pcs
- 16121850-01900Stud, SB10X324 pcs
- 17119000-25900Gear, pump1 pcs
- 18119000-25910Bracket, pump1 pcs
- 19119000-25920Retainer1 pcs
- 2024341-001350O-ring, 1AS135.01 pcs
- 21106100-55800Washer3 pcs
- 2222217-180000Washer, spring 181 pcs
- 2322351-050012Pin, spring 5.0X121 pcs
- 24124410-51960O-ring1 pcs
- 2526106-080252Bolt, M8X 25 plated3 pcs
- 2626366-100002Nut, M104 pcs
- 2726776-180002Nut, lock M181 pcs
