114399-77040 CLUTCH ASSY, PINION — YANMAR
7
The part position is highlighted in red on the diagram
- Part number: 114399-77040
- Manufacturer: Yanmar
- Name: CLUTCH ASSY, PINION
- Weight: 317 g
- Length: 80 mm
- Width: 75 mm
- Height: 95 mm
The diagram shows the assembly “Starting motor & dynamo(previous)” of the Yanmar L70V6CA1T1AA engine.
Where part 114399-77040 is used
Yanmar part 114399-77040 is used in 8 engine models. Assemblies: starting motor & dynamo, starting motor & dynamo(previous).
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Starting motor & dynamo | 7 | 1 | ||
| Starting motor & dynamo(previous) | 7 | 1 |
Other parts of the “Starting motor & dynamo(previous)” assembly, Yanmar L70V6CA1T1AA
- 1114399-77010Starter(iskra 12V1 pcs
- 2114399-77150Gear case assy1 pcs
- 3114399-77030Bush1 pcs
- 4114399-77060Magnetic switch assy1 pcs
- 5114399-77180Shift lever kit1 pcs
- 6114399-77110Armature assy1 pcs
- 8114399-77770Through bolt assy1 pcs
- 9114399-77130Yoke assy1 pcs
- 10114399-77140Rear cover assy1 pcs
- 11114399-77160Brush holder assy1 pcs
- 12114399-77050Bush1 pcs
- 1326106-100302Bolt, M10X 30 plated2 pcs
- 1426716-080002Nut, M81 pcs
- 15114399-78260Dynamo assy1 pcs
- 16114399-78730Stator assy1 pcs
- 17114399-78740Wheel, dynamo1 pcs
- 18160710-78710Clamp, cord1 pcs
- 1926106-060122Bolt, M6X 12 plated1 pcs
- 2026106-060202Bolt, M6X 20 plated3 pcs
- 2126577-060142Screw m 6x 143 pcs
- 22114399-77550Reg. & harness assy1 pcs
- 24114399-77400Bracket, harness1 pcs
- 2526023-040102Screw, M4X102 pcs
- 26114399-77540Harness, wire1 pcs
- 27114399-78000Fuse(20A2 pcs
- 28114399-77710Regulator1 pcs
- 31114351-77500Panel assy1 pcs
- 32105198-07120Label, start switch1 pcs
- 33114351-77520Coupler1 pcs
- 35106100-77620Switch, key1 pcs
- 36106100-77630Key, switch1 pcs
- 37114351-77700Harness, wire1 pcs
- 3829220-083200Bulb (12V/3.4W)1 pcs
