103854-01200 BOLT, CYLINDER HEAD — YANMAR
9
The part position is highlighted in red on the diagram
- Part number: 103854-01200
- Manufacturer: Yanmar
- Name: BOLT, CYLINDER HEAD
- Weight: 119 g
- Length: 135 mm
- Width: 16 mm
- Height: 16 mm
The diagram shows the assembly “Cylinder body” of the Yanmar NFD150(-K) engine.
Where part 103854-01200 is used
Yanmar part 103854-01200 is used in 24 engine models. Assemblies: cylinder block, cylinder body.
| Engine assembly | Diagram pos. | Qty | Engine models | Catalogue notes |
|---|---|---|---|---|
| Cylinder body | 9 | 2 | ||
| Cylinder block | 9 | 4 | ||
| Cylinder block | 9 | 2 |
Other parts of the “Cylinder body” assembly, Yanmar NFD150(-K)
- 1705700-01900Liner assy, cylinder1 pcs
- 5105700-01300O-ring2 pcs
- 6705700-01560Block assy, cylinder1 pcs
- 6-1705700-01561Block assy, cylinder1 pcs
- 822351-060012Pin, spring 6.0X122 pcs
- 10105700-01210Bolt, head2 pcs
- 11103854-01221Nut, cylinder head2 pcs
- 12104700-01240Washer2 pcs
- 13105700-01330Gasket, head1 pcs
- 14705700-01500Case assy, gear1 pcs
- 19105100-01660Plug, 141 pcs
- 20105300-34040Spring1 pcs
- 2122252-000100Ring, 101 pcs
- 2224190-120001Ball, steel 3/81 pcs
- 24105140-76500Seal, TCX25X35X61 pcs
- 25105700-01410Gasket, gear case1 pcs
- 26105500-01480Cover1 pcs
- 27105300-01690Plug1 pcs
- 28105700-01750Cap, filler1 pcs
- 29101104-01760Gasket, cap1 pcs
- 30103854-51940Shim set, adjusting1 pcs
- 3324321-000250O-ring, 1AG25.01 pcs
- 3426106-060162Bolt, M6X 16 plated10 pcs
- 3526106-080352Bolt, M8X 35 plated7 pcs
- 3626106-080752Bolt, M8X 75 plated6 pcs
- 3726216-080222Stud, M8X 223 pcs
- 3826366-080002Nut, M83 pcs
- 3924311-000060O-ring, 1AP6.01 pcs
